In most newer Honda CR-Vs, there isn’t a single universal TPMS reset button. Many models relearn automatically once tire pressures are corrected and you drive, while some trims offer a calibration option in the instrument cluster or settings. If your CR-V does have a physical reset switch, it’s usually tucked away in a hidden spot such as behind the glove box or near the fuse box under the dash.
Understanding TPMS in the CR-V
The Tire Pressure Monitoring System (TPMS) monitors each tire’s pressure and alerts you if a tire is under-inflated. Reset procedures vary by model year and trim. Some vehicles require a simple drive to relearn sensors after inflating to the correct pressures, while others provide a dedicated reset/calibration control in the onboard settings.
Is there a dedicated reset button? Where to look
Not every CR-V includes a physical TPMS reset button. If yours does, common locations include:
- Behind the glove box near the fuse/relay box
- Under the driver’s side dash, in a small panel or near the hood release
- Inside the fuse box compartment under the dashboard
If you can’t find a button, check the owner’s manual or contact a dealer. The availability and exact spot can vary by model year and trim.
Resetting without a button: driving and calibration via settings
If your CR-V doesn’t have a reset switch, you can often reset the system with these methods:
- Inflate all tires to the recommended cold pressures listed on the door jamb placard or in the owner’s manual, then drive at about 50 mph (80 km/h) or faster for roughly 10 minutes to allow the system to relearn.
- If your model supports it, access the TPMS calibration or relearn option in the vehicle’s settings or instrument cluster (for example, Settings > Vehicle > TPMS > Relearn/Calibrate) and follow the on-screen prompts.
After performing a relearn, the TPMS warning light should turn off once the sensors are recognized. If the light stays on, there may be a faulty sensor or wheel issue requiring inspection at a tire shop or dealership.
Model-year specifics
Does your CR-V have a physical reset button?
TPMS reset button availability and location vary by generation. Some older CR‑Vs used a hidden reset switch, typically located behind the glove box or near under-dash panels. Most newer models rely on tire pressure correction plus a self-learn process or a calibration option in the vehicle’s settings. Always consult your owner’s manual for the precise procedure for your year and trim.
Summary
Key takeaway: The exact location of a TPMS reset button on a Honda CR-V depends on the model year and trim. Many modern CR-Vs do not have a dedicated reset switch; instead, you reset by correcting tire pressures and driving, or by using a calibration option in the vehicle’s settings if available. When in doubt, refer to the owner’s manual or check with a dealer or tire shop for your specific year and trim.
Where is the manual TPMS reset button?
Process will begin if there's no button the procedure is done with the display audio. Begin by pressing the home. Button then touch settings touch vehicle next and then TPMS calibration.
How to reset 2026 Honda CRV TPMS?
So the light might pop. Up light comes back after a reset check for a slow leak. If you'd like more CRV tips and tricks hit subscribe and check the full guide in the link below.
Where is the TPMS button on a 2019 Honda CRV?
We're going to look at resetting the maintenance minder and tire pressure monitor on a 19 CRV EXL to start we'll just turn the vehicle. On go to the home. Screen. And hit settings.
Where is the TPMS reset button on Honda CRV?
Recalibration of the tire pressure on your 2017 to 2022 CRV is a very straightforward. Process but it varies based on your vehicle's configuration. And model year for the base model LX from 2017 to