The oil filter on a 2016 Nissan Rogue with the 2.5L engine sits on the underside of the engine on the passenger side, inside a cartridge-style housing that is accessible from beneath after removing the front splash shield. It is not a traditional spin-on filter you can reach from the top.
Location in the engine bay
The filter is mounted to the lower portion of the engine block on the passenger side, near the oil pan. Access is gained from underneath the vehicle by removing the front splash shield, then locating the rectangular filter housing against the engine block.
Key reference points to help you spot it:
- Located on the passenger side of the engine block, near the oil pan
- Inside a removable housing with a cap rather than a visible spin-on canister
- Usually reachable after removing the front splash shield or undercarriage cover
- Positioned near other components like the alternator area, depending on the exact engine layout
In practical terms, you’ll need to crawl under the car, remove the splash shield, and look for a small housing mounted to the engine block on the passenger side where the filter sits.
How to access and replace the oil filter
To replace the oil filter, follow these steps. Exact tool sizes and torque specs vary by model year and trim, so consult the owner's manual or service manual for specifics.
- Raise and securely support the vehicle and remove the front splash shield or undercarriage cover.
- Locate the oil filter housing on the passenger side of the engine block near the oil pan.
- Loosen and remove the housing cap to release and remove the old cartridge filter.
- Install a new cartridge filter and reseal the housing cap (replace any O-rings or seals provided).
- Reinstall the housing cap and refill the engine with the proper amount and grade of oil.
- Start the engine, check for leaks, and recheck the oil level after a brief run. Dispose of the old filter and oil according to local regulations.
Tip: Keep your owner's manual handy for torque specs and any model-specific steps. If you’re unsure, consult a professional technician.
Summary
For a 2016 Nissan Rogue with the 2.5L engine, the oil filter is a cartridge-style unit located on the passenger side of the engine block, underneath the vehicle behind the splash shield. Access is from below via the shield, and replacement involves removing the housing cap, swapping in a new cartridge, and reassembling, followed by oil refilling and leak checks. Always follow safety practices and local disposal regulations.