For a 2020 Ram 1500, the oil filter location depends on which engine you have: the 3.6L Pentastar V6, the 5.7L Hemi V8, or the 3.0L EcoDiesel. In most configurations, you’ll find the filter mounted on the side or top of the engine block, sometimes inside a cartridge housing, and access may require removing a shield or an engine cover. Confirm the exact spot for your specific engine using the owner's manual or a service guide.
Oil filter locations by engine
The following outlines the typical locations for the three common engines found in the 2020 Ram 1500. If your build differs, consult the manual for the precise location.
- 3.6L Pentastar V6 — Usually uses a cartridge-style oil filter housed on the side of the engine, commonly on the driver’s side near the valve cover. Access may require removing the engine cover and/or parts of the intake or a shield.
- 5.7L Hemi V8 — Typically employs a conventional spin-on oil filter mounted on the passenger side of the engine, toward the front. Access is often from underneath the vehicle; you may need to remove a splash shield to reach it.
- 3.0L EcoDiesel — Generally uses a cartridge-style filter in a housing on the side/front of the engine (often the passenger side). Replacing the filter usually involves removing the housing cap and installing a new cartridge; shield or undertray removal may help access.
Note: Some trims, production revisions, or aftermarket configurations can alter exact placement. If you’re unsure, checking the owner’s manual, a factory service manual, or consulting a dealer can provide the definitive location for your exact vehicle.
Access and safety tips
What to know before you start
Always ensure the engine is cool before starting work. Gather the right tools and parts, including the correct filter type for your engine, an oil catch pan, a filter wrench if needed, and fresh engine oil. If you must raise the vehicle, use jack stands and chocks for safety, and dispose of used oil and filters properly.
- Tools and parts: filter wrench (for spin-on filters), replacement filter (or cartridge kit), appropriate oil grade, drain pan, rags, gloves
- Safety: use jack stands if you lift the truck; chock the wheels; work in a well-ventilated area
With the right approach, locating and replacing the oil filter on a 2020 Ram 1500 can be straightforward once you know your engine option and the access path.
Summary
The oil filter location on a 2020 Dodge Ram 1500 varies by engine. For the 3.6L Pentastar V6, look for a cartridge-style filter on the side of the engine (often driver’s side). For the 5.7L Hemi V8, expect a spin-on filter on the passenger side toward the front, usually accessible from underneath. The 3.0L EcoDiesel uses a cartridge-style filter in a housing on the side/front of the engine. Always verify with the owner’s manual or service guide for your exact configuration.
Where is the oil filter located on a 5.7 L HEMI?
And now I'm going to turn it. So you can see I'm turning. It. So that's fine and uh I can actually get to it from the front from the other side. So there's plenty of room. There.
Where is the oil filter on a Dodge Ram 1500?
This making sure you have an oil collector on. Hand. Let the oil run out for about 10. Minutes.
Where is the engine oil filter located?
The oil filter is usually located beside the oil pan or under the hood of your vehicle near the engine. Place the collection pan under the filter. You can use a filter wrench to help remove.
Where is the oil filter located on a 2020 Ram 1500?
Locate the Oil Filter: As mentioned earlier, the 2020 ram 1500 oil filter location is at the front of the engine bay^1^. Remove the Old Filter: Use your oil filter removal tool to unscrew and remove the old oil filter. Make sure your drain pan is in place to catch any dripping oil.