In brief, the oil filter on a 2014 Honda Accord is attached to the engine block, but the exact spot depends on which engine the car has. The 2.4L four‑cylinder tends to have a side‑mounted filter in a housing on the engine, while the 3.5L V6 generally places the filter lower near the front of the engine and often behind splash shielding. Access typically requires lifting the car and removing the undertray or splash shield.
Four-cylinder 2.4L engine
The 2.4L four‑cylinder configuration in the 2014 Accord places the oil filter in a side-mounted housing on the engine block. It is not usually visible from the top without removing some components, and may be tucked near the passenger side of the engine bay. You’ll commonly access it from underneath the vehicle or after removing the engine covers or undertray.
Below is a practical way to locate it:
- With the hood open, look along the right (passenger) side of the engine block for a cylindrical housing or a small cartridge-style filter held in place by a cap or end plate.
- From underneath the car, remove the splash shield/undertray to reveal the lower portion of the engine where the filter housing sits.
- Follow the oil routing toward the filter area; the filter should be clearly mounted to the block, separate from the oil pan.
In summary, for the 2.4L engine, expect a side‑mounted filter on or near the engine block, accessible from under the car or with some engine bay components removed.
V6 3.5L engine
On the 3.5L V6, the oil filter is typically located toward the front of the engine and lower, often behind the splash shield. It may be mounted in a way that requires a view from below, with the undertray removed, to clearly access the filter assembly or housing.
Step-by-step guidance to find it:
- Raise and support the car, then remove the front splash shield or undertray if your model has one.
- Look for a cylindrical filter housing attached to the front or lower side of the engine block, near the oil pan area.
- Inspect the housing; if it uses a cap or end plate, you’ll need the corresponding tool to remove it and replace the cartridge or filter element inside.
In short, the V6’s oil filter is usually found lower on the engine’s front underside, accessible after removing shielding and from beneath the car.
Tips and quick reminders
Always consult the owner’s manual or a service manual for your exact VIN and engine code, as there can be variations by trim and production date. When replacing the filter, also replace the oil drain washer if advised, and ensure you use the correct oil grade and quantity for your engine.
Summary
The 2014 Honda Accord does not have a single universal oil‑filter location; it depends on the engine. The 2.4L four‑cylinder typically has a side‑mounted filter on the engine block, accessible from above or beneath, while the 3.5L V6 generally places the filter lower on the front underside of the engine, accessible from underneath after removing shielding. If you’re unsure, check the service manual for your exact engine code and VIN, and always follow proper safety procedures when lifting the vehicle.