The oil filter on most 2014 Honda Accord Sport models sits on the engine block, inside a cartridge-style housing on the passenger side. Access is typically from above with the hood open (engine cover removed) or, if needed, from underneath with the car raised. The exact spot can vary depending on the engine option, so check your specific motor configuration.
In 2014, the Accord offered two main engines. The oil filter location differs slightly between them, though both are mounted to the engine block rather than directly into the oil pan. The two common setups are the 2.4-liter inline-four and the 3.5-liter V6. Below is a quick guide to where each typically sits.
Engine options and oil filter location
The following notes describe the usual locations for the two engine choices found in the 2014 Accord Sport. Use these as a general guide, and verify with your owner's manual or service manual for your exact build.
- 2.4L i-VTEC inline-four (the more common engine for the 2014 Accord Sport): The oil filter is mounted on the passenger side of the engine block, inside a cylindrical housing. It is accessible from above once the engine cover is removed, or from underneath if you have access beneath the vehicle.
- 3.5L V6: The oil filter is mounted on the front side of the engine block, inside a cartridge-style housing. Access is typically from the top/front area of the engine, though some setups may be easier to reach from underneath with the car raised.
In both configurations, the filter sits in a housing on the engine block rather than directly screwed into the oil pan. If you’re not certain which engine your car has, consult the VIN or the owner's manual for the exact diagram.
How to locate the oil filter on your specific car
Use these steps to verify the exact oil-filter location on your particular 2014 Accord Sport, especially if you’re planning an oil change or filter replacement.
- Park the car on a level surface, engage parking brake, and ensure the engine is cool before starting any work.
- Open the hood and, if present, remove the engine cover to reveal the top portion of the engine.
- Look to the passenger side of the engine block for a cylindrical housing or canister-shaped component labeled as the oil filter or OIL FILTER. It may be tucked near the firewall or toward the back of the engine bay.
- If you don’t see it from the top, check beneath the vehicle. Some filter housings are more accessible from underneath, especially with the splash shield/underguard removed.
- When in doubt, consult the owner's manual or a Honda service diagram for your exact trim and VIN to confirm the filter’s location.
Being mindful of your car’s specific engine variant will ensure you locate the correct filter housing quickly. If you’re uncomfortable or unsure, a professional technician can identify and service the filter efficiently.
Summary
The 2014 Honda Accord Sport typically places the oil filter on the engine block inside a cartridge-style housing on the passenger side, with exact placement varying by engine (2.4L inline-four or 3.5L V6). You can usually access it from above once the engine cover is removed, or from underneath if needed. To confirm the exact location for your specific vehicle, check the owner's manual or service diagram and, if necessary, consult a technician.