In brief, the oil filter location depends on the engine installed in your car. A 2012 Chrysler 200 could be equipped with either a 2.4-liter inline-4 or a 3.6-liter V6, and each has the filter mounted on the engine side, typically accessible from beneath with the front splash shield removed. The exact spot differs by engine type.
Understanding where to find the filter is useful for routine maintenance and oil changes. Below is a practical guide to locating the oil filter for the two engine options that were offered in the 2012 model year.
Engine variants and oil filter locations
2.4L Tigershark inline-4
Location and access details for the 2.4L engine in the 2012 Chrysler 200.
- Location: on the passenger side of the engine block, toward the front of the engine bay, in a vertical canister.
- Access: typically reachable from underneath the vehicle after removing the front splash shield or undercarriage cover.
- Orientation: conventional spin-on oil filter.
When working on the 2.4L, prepare for undercarriage access and ensure the engine is cool before attempting removal or replacement.
3.6L Pentastar V6
Location and access details for the 3.6L engine in the 2012 Chrysler 200.
- Location: on the side of the engine, often in a remote oil filter housing mounted near the front of the engine, sometimes tucked beside the timing area.
- Access: usually from underneath the vehicle with the lower splash shield removed; some models may offer easier access from below after removing components that obstruct the area.
- Note: the 3.6L may use a remote/filter housing rather than a traditional top-mounted canister.
Because the 3.6L Pentastar configuration can vary by production date and market, verify by inspecting the engine area or consulting the service manual for your specific VIN.
Summary
The 2012 Chrysler 200’s oil filter location depends on the engine: the 2.4L Tigershark engine places the filter on the passenger side of the engine block near the front, generally accessible from underneath with the splash shield removed; the 3.6L Pentastar uses a side-mounted remote filter housing on the same general area, also accessible from beneath. Always confirm the exact location on your vehicle by checking the owner’s manual or a factory repair guide for your VIN, as production variations can alter the precise placement.