The oil filter on a 5.7 L HEMI is mounted on the passenger side of the engine block, toward the front, and is accessible from underneath.
In typical modern 5.7 L HEMI installations in Dodge, Jeep, and Ram vehicles, the filter is a standard spin-on unit that screws into the engine block on the right-hand side when facing the front of the vehicle. Exact placement can vary slightly by model year and configuration, so if in doubt check the owner's manual or service manual for your vehicle.
Where to spot it on a typical 5.7 L HEMI
Use this quick guide to locate the filter on most configurations; the exact spot can vary by year, make, and model.
- Location: passenger side of the engine block, toward the front, near the oil pan.
- Appearance: a cylindrical spin-on filter threaded into the side of the block; accessible from underneath the vehicle with the exhaust components nearby.
In most modern 5.7 L HEMI engines, this is the standard placement. If you cannot find it in this area, consult the official manual for your year and VIN, as some early or specialty setups may differ.
Notes for changing the oil
While locating the filter is the first step, always ensure the engine is cool and that you have the proper tools and drain pan ready before starting an oil change. If your vehicle has a service manual or an online guide for your specific year, it will provide the exact torque specifications and filter model to use.
Summary
For most 5.7 L HEMI installations, the oil filter sits on the passenger side of the engine block near the front, reachable from underneath. Always verify with your vehicle’s manual if you’re unsure, as a few early or special configurations can place the filter differently.