The OBD-II port on a 2000 Honda CR-V sits under the driver's side dashboard, near the left kick panel, behind a small cover. It uses the standard 16-pin OBD-II connector that most scanners plug into.
In this guide, we explain exactly where to look, how to access the port safely, what the port typically looks like, and how to connect a diagnostic scanner. The 2000 CR-V is part of the first-generation model run (1997–2001) and uses the universal OBD-II standard. If you have a different market variant or trim, the location is usually similar but may vary slightly.
Location and access
Before you start, know that the port is designed to be accessible from the driver's seat area and is often tucked behind a small plastic cover near the left side of the dash.
Where it sits
Under the dashboard on the driver's side, adjacent to the left kick panel and toward the center console. The port is typically hidden behind a removable panel or trim piece that blends with the dash.
What you’ll see
The port itself is the standard 16-pin OBD-II connector. It’s a rectangular to trapezoidal socket that accepts most OBD-II scanners.
How to access it
Follow these steps to locate and access the OBD-II port in a 2000 CR-V:
- Park the vehicle, set the parking brake, and turn off the engine and ignition.
- Sit in the driver’s seat and look beneath the dash on the left side of the steering column, near the knee area.
- Check for a small removable plastic cover or panel over the port and gently pry it off if needed.
- Expose the 16-pin OBD-II socket and inspect for any debris or corrosion.
- Plug your OBD-II scanner’s connector firmly into the port and power on the scanner.
Concluding this section, removing the cover and seating the scanner securely will allow you to read codes, perform basic diagnostics, or monitor live data from the engine and emissions systems.
Safety and best practices
Always ensure the vehicle is off before connecting or disconnecting a scanner. Handle the connector gently to avoid bending the pins, and never force a connector into the port.
Summary
For a 2000 Honda CR-V, the OBD-II port is located under the driver’s side dashboard, near the left kick panel, behind a small access cover. Access it by removing the cover, then connect a standard OBD-II scanner to read codes or perform basic diagnostics. This location is typical for first-generation CR-V models, with only minor variations possible by market or trim.
How much is a 2000 Honda CR-V worth today?
A 2000 Honda CR-V SE Sport Utility 4D has depreciated $252 or 7% in the last 3 years and has a current resale value of $3,154 and trade-in value of $1,639.
Where is the OBD port in a Honda CRV?
And to locate the OBD2. Port I am going to walk over to the front driver's side door and open it just like that. And I am going to go basically where the steering wheel is underneath.
Which CRV year to stay away from?
The first CR-V of the 21st century sees an increase in engine-related issues and the beginning of a series of recalls for defective airbags (the notorious Takata airbag recall). The recall affected numerous model years (mostly 2002-2015), so always check this out if you're buying a used CR-V.
Where is the OBD2 port located on a 2000 Honda CRV?
Side. But you can go under there you can look everywhere you want to you're not going to find it. Tada that is where the connector is on the passenger. Side on this CRV.