In most Honda CR-V models, the interior fuse boxes are located in two main places: under the driver’s side dash and inside the glove box on the passenger side. Some model years also include a rear cargo-area fuse box. Always refer to the owner’s manual or the fuse diagram on the panel cover to identify the exact fuses and amperages for your year and trim.
This guide outlines the common locations, how to access them, and best practices for inspecting or replacing fuses. The exact layout can vary by year, so use the diagrams on the panels as your primary reference.
Locations you’ll likely check first:
- Driver's side under-dash fuse box (left side of the driver’s footwell). Access is via a small cover that swings open or pulls off; a fuse puller is often attached to or stored inside the panel.
- Glove box fuse panel (passenger side). This panel is typically behind or inside the glove box door; remove the cover to reveal the fuses and a diagram showing what each fuse controls.
- Rear cargo-area fuse box (present on some model years and trims). Located in the cargo area, usually on the right-hand side behind a removable panel or cover.
Note: The CR-V’s interior fuse layout can differ between generations and trims. If you don’t see a panel where described, check the owner’s manual or inspect the fuse box covers for the accompanying fuse map.
Accessing and Using the Interior Fuse Boxes
Driver's side under-dash fuse box
The main interior fuse box on the driver’s side is typically located beneath the dashboard, near the left footwell. To access it, open the small cover on the lower dash and remove the panel if needed. The fuse map is usually printed on the inside of the cover. Use the included fuse puller (or a small pair of pliers) to remove or replace fuses. Replace with the same amperage rating as indicated on the cover.
Glove box fuse panel
The glove box fuse panel is commonly found behind a panel or inside the glove box door on the passenger side. Open or remove the panel to view the fuses and their designations. As with the driver’s-side box, use the fuse puller to remove blown fuses and replace them with the correct amperage. The diagram on the cover shows which fuse controls each circuit.
Rear cargo-area fuse box
If your CR-V model year includes a rear cargo-area fuse box, locate it on the right side of the cargo space behind a removable cover. Remove the cover to access the fuses and replace as needed with the specified amperage. The fuse map is printed on or inside the cover.
Safety Tips and Best Practices for Replacing Fuses
Before handling any fuses, ensure the vehicle is off and the key is removed from the ignition. Use the correct fuse amperage as indicated on the fuse panel diagram. Do not replace a blown fuse with a higher-amp rating to power a malfunctioning component, as this can cause wiring damage or fire. Keep a few spare fuses of the indicated ratings in your vehicle or consult a dealer for replacements.
Summary
The interior fuse boxes in a Honda CR-V are typically found under the driver’s side dash and inside the glove box, with a possible third panel in the rear cargo area on some models. Always consult the fuse diagram on each panel for exact allocations and amperage, and follow safe procedures when removing and replacing fuses. If in doubt, refer to the owner’s manual or contact a Honda service professional for guidance.