There are two fuse boxes in a 2016 Honda CR-V: one in the engine compartment and one inside the cabin on the driver’s side. The engine box is located under the hood on the engine bay side, while the interior box sits behind a panel on the left side of the dashboard near the driver's knee.
Locations at a glance
To help you locate them quickly, note that each fuse box has a labeled cover with a fuse chart. The engine compartment box is clearly marked “FUSE/RELAY BOX” and the interior box carries a similar label for inside-the-vehicle circuits.
- Engine compartment fuse box: Under the hood, typically on the driver’s side of the engine bay near the firewall or strut tower. The cover is removable and the underside contains a diagram of fuses.
- Interior fuse box: On the left side of the driver’s dashboard, behind a small panel near the knee area. The fuse map is usually on the inside of the cover or in the owner's manual.
When in doubt, the owner’s manual provides exact fuse locations and amperage ratings for each circuit.
Engine compartment fuse box
This fuse box resides in the engine bay and is the primary location for critical engine and accessories fuses. The cover is labeled and can be removed by pulling it straight up; a diagram on the underside identifies each fuse and its amperage.
Access tips
Before inspecting or replacing fuses, turn off the ignition and, if you’re working near live circuits, disconnect the battery to avoid sparks. Use the fuse puller (often built into the box) or non-conductive tools to remove and replace fuses with the same amperage rating.
Interior fuse box
The interior fuse box is located behind a small panel on the driver’s side of the dash, near the knee area. This box contains fuses for interior electronics such as the lights, horn, power windows, audio system, and other cabin circuits. The fuse diagram is on the cover or in the owner’s manual.
Access tips
Open the panel to expose the fuses, identify the circuit using the diagram, and replace with the same amperage rating. If a fuse repeatedly blows, have the underlying electrical issue checked by a technician.
What to do if a fuse blows
First, turn off the vehicle and locate the suspect fuse using the diagrams on the covers. Remove the fuse with the proper tool and inspect for a blown filaments or a darkened appearance. Replace only with a fuse of the same amperage rating and type (fast-acting or slow-blow as specified). If the new fuse blows again, consult a professional to diagnose possible short circuits or faulty components.
Summary
The 2016 Honda CR-V has two fuse boxes: under the hood in the engine compartment and inside the cabin on the driver’s side dash. Use the labeled covers and diagrams to identify the correct fuses, and replace them with the same amperage rating while following safe electrical practices. For persistent electrical issues, seek professional service.