Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

Where is the fuse box in a 2014 Honda Civic?

The 2014 Honda Civic has two fuse boxes: an engine-compartment fuse box on the driver's side and an interior fuse box behind the driver's side dash. The covers carry diagrams, and the owner's manual confirms the circuits each fuse protects.


The Civic's electrical system is split between these two locations. The under-hood box powers components such as the engine management and major electrical circuits, while the interior box protects controls like lights, the infotainment, and accessories. Accessing and replacing fuses is straightforward but requires matching the amperage rating and re-securing the cover.


Locations and how to access them


Use this guide to locate and open the two fuse boxes and identify the fuse you need to inspect or replace.



  • Engine compartment fuse box: Located in the engine bay on the driver's side of the vehicle. Look for a black plastic cover labeled "FUSE" or "FUSES." Remove the cover to reveal the fuses and relays.

  • Interior (cabin) fuse box: Located behind the driver's side lower dash panel (kick panel), near the hood release handle. Remove the panel cover to access the fuse box and diagram.


Both covers include a diagram listing each fuse's purpose and the corresponding amperage. If you can't read the tiny print, consult the owner's manual or a label on the box for the fuse map.


How to check or replace fuses


Follow these steps to safely check or replace fuses in a 2014 Civic:



  1. Turn off the ignition and remove the key; ensure all electrical loads are off.

  2. Open the relevant fuse box (engine bay or cabin) using the diagram on the cover.

  3. Identify the fuse related to the affected component using the fuse map.

  4. Remove the fuse with a fuse puller (or needle-nose pliers) and inspect it for a blown element (the metal strip inside will be broken).

  5. Replace with a fuse of the same amperage rating as indicated on the diagram.

  6. Reinstall the fuse, close the box, and test the component.


Concluding note: Always ensure you use the correct amperage fuse and reseal the box to protect the circuits from moisture and debris. If a fuse keeps blowing, there may be an underlying electrical issue that requires professional inspection.


Additional tips and sources


Refer to the 2014 Honda Civic Owner's Manual for the exact fuse map and amperage ratings. If you don't have the manual, you can often download a PDF from Honda's official site or view the diagram printed on the fuse box covers.


Summary: The 2014 Honda Civic stores fuses in two places—an engine-compartment box on the driver's side and an interior box behind the driver's side dash—each with its own diagram. Accessing them is straightforward with basic tools, and using the correct amperage is essential for safe operation.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.