Cylinder 6 on a 2016 Dodge Durango sits on the engine’s right-hand (passenger) bank. For the common 3.6-liter V6, it is the rear-most cylinder on that bank; for the Hemi V8 options (5.7L or 6.4L), it is the second cylinder from the front on the right bank.
Engine variants and cylinder 6 locations
The Durango came with different engines in 2016. Here is where cylinder 6 sits on the two most common setups.
- 3.6L Pentastar V6 — Cylinder 6 is the rear-most cylinder on the passenger-side (right) bank, toward the firewall.
- 5.7L Hemi V8 — Cylinder 6 is on the right (passenger) bank and is the second cylinder from the front on that bank.
- 6.4L Hemi V8 (SRT) — Cylinder 6 is on the right bank and is the second cylinder from the front on that bank.
In all cases, the right-hand bank refers to the passenger-side bank when facing the engine from the front of the vehicle. If you’re unsure which engine your Durango has, check the under-hood label or the owner’s manual to confirm the exact configuration before working on it.
How to verify on your own
To confirm the location of cylinder 6 on your specific Durango, follow these steps based on your engine type.
- Identify your engine type (3.6L V6 or Hemi V8: 5.7L or 6.4L).
- Look at the right-hand (passenger) bank of cylinders from the front of the engine; for the 3.6L V6, cylinder 6 is the rear-most on that bank; for the V8s, cylinder 6 is the second from the front on that bank.
- Refer to the under-hood label, valve-cover markings, or a factory diagram to confirm the numbering for your exact engine and trim.
Using a diagram or the service manual will reduce confusion when working on components like spark plugs or ignition coils on a specific cylinder.
Summary
Across 2016 Durango models, cylinder 6 resides on the right-hand (passenger) bank of the engine. For the 3.6L V6, it is the rear-most cylinder on that bank; for the 5.7L or 6.4L Hemi V8s, it is the second cylinder from the front on the right bank. Always verify your exact engine type and reference the vehicle’s manual or a reliable diagram to locate cylinder 6 precisely.
Is a Dodge Durango a 6 cylinder?
Dodge Durango Features
Today, even large three-row SUVs will often come with a four-cylinder engine as the standard powerplant. Since that wouldn't be very “muscle car”, the Dodge Durango comes standard with a 3.6-liter Pentastar® V6 that produces 295 horsepower and 260 lb-ft of torque.
What is the cylinder order for a 3.6 V6?
And performing your own maintenance. So without wasting any more time let's get started the firing order for the Dodge 3.6 Pennar engine is 1 2 3 4 5 6. This means cylinder 1 fires.
What is the fastest Dodge SUV?
2026 Dodge Durango SRT Hellcat
The 2026 Dodge Durango SRT Hellcat is the world's fastest family SUV, powered by a 710 hp supercharged HEMI V8 and now available in right hand drive exclusively through Autogroup International.
Where is the cylinder 6 on a Dodge Durango?
The sixth cylinder is located at the back on the driver's side. A misfire in that cylinder can be attributed to a faulty spark plug, coil, or injector. The fastest way to diagnose the issue is to swap the coil or plug with another cylinder; if the misfire shifts, it indicates the problem.