The cabin air filter on a 2013 Honda Fit is located behind the glove box on the passenger side of the dash. Access is gained by lowering the glove box and removing a small cover to reach the filter housing.
What to know about the location
In this model year, the cabin filter sits inside a rectangular housing tucked behind the passenger-side glove box. You’ll need to drop the glove box down and open an access panel to see the filter. The setup is designed to keep routine maintenance fairly simple for DIY enthusiasts.
Access overview
After you release the glove box stops and possibly detach a small damper, you’ll find a plastic panel or cover that conceals the filter. The filter itself is a flat panel that slides into the housing with its arrows indicating airflow direction.
Step-by-step replacement process
To replace the cabin filter, follow these steps. They are written to fit the common layout used on 2013 Fits; variations by trim are uncommon but possible.
- Prepare a clean work area and have a new cabin air filter the correct size ready. A flashlight can help you see the housing more clearly.
- Turn off the engine and vehicle accessories, then open the glove box. Remove contents and gently squeeze the sides of the glove box to release the stops so it can drop down.
- If present, disconnect the glove box damper (the small plastic arm) to allow the box to hang lower without resistance.
- Look behind the glove box for the rectangular filter housing. Open the housing cover by releasing the clips or removing the screws that hold it in place.
- Carefully pull out the old filter. Note the orientation of any arrows on the filter to match airflow direction before installing the new one.
- Insert the new filter with the arrows pointing in the same direction as the original (toward the cabin). Ensure the filter seats flatly in the housing.
- Reattach the housing cover, reattach the glove box damper if removed, and snap the glove box back into place. Return items to the glove box and test the airflow by turning on the climate control.
Replacing the cabin filter is a straightforward maintenance task that helps keep the car’s interior air clean and the HVAC system functioning efficiently. If the airflow seems weak or smells musty after replacement, recheck the filter fit and seal around the housing.
Tips and quick-reference notes
Common questions about the 2013 Honda Fit cabin filter location are answered here to help you avoid unnecessary steps or damage to the dashboard components.
Summary
For a 2013 Honda Fit, the cabin air filter resides behind the passenger-side glove box. Access requires lowering the glove box, optionally removing a small damper, and removing a protective cover to replace the filter. With the new filter in place and the glove box reassembled, you’ll maintain better cabin air quality and HVAC efficiency.