The cabin air filter in a 2015 Honda CR-V is located behind the glove box on the passenger side of the dash. Access is gained by opening and lowering the glove box to expose a rectangular filter housing.
Location and Access
To reach the filter, follow these steps:
- Open the glove box and remove its contents so you can work comfortably.
- Squeeze the sides of the glove box to release the stoppers and let the box drop down. Some models may have a small damper or hinge that you gently move aside.
- Look behind the glove box on the passenger side of the dash for a rectangular filter housing door.
- Open the housing door by pressing the tabs and lower it to reveal the cabin air filter.
- Remove the old filter, noting the correct orientation of the arrows (the arrows should point toward the rear of the vehicle).
- Insert the new filter with the arrows facing the same direction, ensuring it sits fully in the housing.
- Close the housing door, lift the glove box back into place, and resecure any dampers or stops you released.
With the new filter installed, you can test the system by turning on the interior fan and ensuring there is good airflow. Regular replacement is typically every 12,000–15,000 miles or annually, whichever comes first, with more frequent changes in dusty or high-pollution environments.
Maintenance tips
Keep an eye out for signs that the filter needs replacement, such as reduced air flow, unusual odors, or increased dust in the cabin. Always check the condition of the filter when performing other routine maintenance on the HVAC system.
Summary
In a 2015 Honda CR-V, the cabin air filter sits behind the passenger-side glove box. Access it by lowering the glove box, releasing the filter housing door, and replacing the filter with the correct orientation. Reinstall everything and follow the recommended replacement interval to maintain cabin air quality.