The 2017 Nissan Rogue has two air filters: the engine air filter in the engine compartment and the cabin air filter behind the glove box.
This article explains where each filter sits, how to access them, and what you’ll need to replace them, with step-by-step instructions for DIY maintenance.
Engine air filter location
What you’ll need
You’ll typically need only a replacement engine air filter and your hands; no special tools. A flashlight can help, and gloves may keep your hands clean. The air box is a rectangular black plastic housing secured with clips or small screws.
Before you begin, ensure the vehicle is off and the hood is secured. If you’re unsure about the exact part, refer to the owner's manual or take the old filter to a parts dealer for identification.
- Open the hood and locate the engine air filter box in the engine bay; it’s a rectangular black plastic housing connected to a large intake hose.
- Release the clips or screws that secure the lid and lift it away to reveal the filter.
- Remove the old filter and inspect the housing for debris or signs of wear. Wipe the inside if needed.
- Insert the new filter, ensuring the orientation matches the airflow arrows on the filter and the housing.
- Reattach the lid and secure the clips or screws firmly, making sure the seal is snug to prevent unfiltered air from entering.
- Close the hood and start the engine briefly to verify there are no unusual noises and that the intake is seating properly.
Replacing the engine air filter is a routine maintenance task that can improve engine performance and fuel economy, especially if the filter was dirty or clogged.
Cabin air filter location
What you’ll need
The cabin air filter is located behind the glove box on the passenger side. Generally, no special tools are required; you may need to release the glove box stops or damper to lower the box and access the filter housing. The filter sits in a rectangular housing with a removable cover.
As with any DIY maintenance, ensure the car is off and the glove box is empty before starting.
- Stand to the passenger side and open the glove box. If it doesn’t drop fully, squeeze the sides or disengage the damper to allow it to swing down.
- Locate the cabin air filter cover behind the glove box and slide or unclip it to expose the filter.
- Remove the old filter and check the housing for debris. If needed, wipe the area clean with a dry cloth.
- Insert the new cabin air filter with the arrows pointing toward the direction of airflow (typically toward the center of the vehicle).
- Reattach the filter housing cover and lift the glove box back into place, ensuring the damper and stops click back into position.
Replacing the cabin air filter helps maintain interior air quality, reduce odors, and keep the HVAC system functioning efficiently.
Summary
In the 2017 Nissan Rogue, the engine air filter sits in a rectangular box in the engine bay, while the cabin air filter is tucked behind the glove box on the passenger side. Both filters are accessible with basic tools or none at all, depending on the model. Following the outlined steps will help you replace them correctly and maintain performance and air quality inside the vehicle.