There isn’t a universal TPMS reset button location that works for every vehicle. The reset control and relearn procedure vary by make and model, and some cars don’t require a button at all—the system can relearn automatically after tire service or driving.
This guide helps you locate the reset control on common layouts, explains how to reset or relearn the TPMS, and outlines steps to take if a warning light persists.
Common locations for the TPMS reset control
Use this checklist to locate the reset control on many passenger cars. Not every option will apply to your model, so consult your owner’s manual for the exact spot.
- Under the driver’s side dash, near the knee bolster or the hood release lever
- Inside or behind the glove box, sometimes behind a removable panel
- In the center console area, near the shifter or under a small storage lid
- On the instrument cluster or dash, sometimes as a dedicated button labeled TPMS or RESET
- In the rear cargo area for some hatchbacks and SUVs
Not all vehicles require a physical button. Some models instead use a relearn option in the instrument cluster or infotainment system, or automatically relearn once tire pressures are corrected and the vehicle is driven.
How to reset or relearn TPMS
Before attempting a reset, ensure all tires are inflated to the recommended pressures found on the door jamb placard or in the owner’s manual. Then use the appropriate reset method for your car.
- Check and correct tire pressures to the OEM specification (even for the spare, if it has a TPMS sensor) before any reset.
- If there is a physical TPMS/RESET button: locate it and press/hold it as directed by your manual until the TPMS indicator light blinks or a confirmation message appears.
- If your vehicle uses a menu-based relearn: navigate to the TPMS or Tire Pressure menu in the instrument cluster or infotainment system and select Relearn or Reset, then confirm.
- Drive the vehicle for a period (commonly about 10 minutes at 30–50 mph or highway speeds) to complete the relearn process. Some cars require a longer drive or specific conditions (e.g., steady speeds or traction on a flat surface).
- Check the dashboard to confirm the TPMS warning light resets. If the light remains on, recheck tire pressures and repeat the relearn steps, or consult a dealer if necessary.
If your car doesn’t have a dedicated reset button, the relearn may occur automatically after you drive with properly inflated tires for a sufficient distance and time, or via a settings menu in the vehicle’s display system.
If your car doesn’t have a reset button
Many newer vehicles manage TPMS relearn automatically. After correcting tire pressures, drive as recommended in the owner’s manual (usually for 10–20 minutes at highway speeds). If the warning light stays on or seems unreliable, you may need to use the vehicle’s diagnostic menu or visit a service professional for a diagnostic relearn using specialized equipment.
When to seek dealer or shop assistance
Consult a dealer or tire service center if the TPMS warning persists after attempting the standard relearn, if multiple sensors are suspected faulty, or if you recently replaced tires and the system cannot complete a relearn. A professional can verify sensor health and perform a precise relearn procedure with the proper tools.
Summary
The location and method for resetting TPMS vary by vehicle. Start by inflating all tires to the recommended pressures, then locate the reset control if your model requires one, or use the instrument cluster/menu relearn option if available. Drive as directed to complete the relearn, and consult the owner’s manual or a professional if the warning persists. Being methodical about tire pressures and following your car’s specific procedure will usually resolve a TPMS warning without needing a dealer visit.