On a Honda Accord, the official recommended cold tire pressures are listed on the driver’s door jamb placard, and your current tire pressures appear on the vehicle’s Tire Pressure Monitoring System (TPMS) display in the instrument cluster or information screen. For confirmation, you can also consult the owner's manual or tire labels that came with your car.
Where to find the official recommended tire pressures
The following sources tell you the inflation targets you should aim for when tires are cold. They can vary by model year and trim, so always verify with your specific vehicle.
- Door jamb placard on the driver’s door: shows the recommended cold tire pressures for the front and rear tires; the exact numbers can differ by year and trim.
- Spare tire information: if your Accord uses a temporary spare, its recommended pressure is usually listed on the spare’s label or in the owner's manual; temporary spares are typically inflated to a higher setting (commonly 60 psi) and are not intended for long-term use.
The door jamb placard is the primary, model-specific reference for the correct inflation targets you should use during regular maintenance.
Viewing current tire pressures in your Accord
To monitor live pressures, use the TPMS readout available in the driver information interface. The method to access it can vary by year and trim, but it generally involves using the steering wheel controls to select Tire Pressure or TPMS on the display. The system shows the current pressure for each wheel and flags any underinflation.
- How to view: With the ignition on, navigate to the Tire Pressure screen via the information display (often labeled TPMS or Tire Pressure) using the steering wheel buttons.
- What you’ll see: Individual pressures for the four wheels (and sometimes the spare, depending on the setup) along with any warning if a tire is low.
- What to do if a warning appears: Check all tires with a gauge, adjust to the recommended cold PSI on the door placard, then drive a short distance to recalibrate the TPMS.
Using the TPMS readout provides real-time feedback on each tire’s current state, but always verify with a physical gauge when inflating or adjusting pressures.
Other sources and practical notes
Beyond the placard and TPMS, a few additional references help ensure proper inflation. Remember that the tire sidewall shows the maximum allowable pressure, which is not the recommended operating pressure; the door placard gives the safer, tested targets for daily driving. If you’ve replaced tires or wheels, or if you regularly carry heavy loads, recheck the recommended pressures in the manual or on the placard for your specific configuration. For spare tires, check the dedicated spare label or the manual for the correct PSI, as it often differs from the regular tires.
- Tire sidewall maximum pressure: This indicates the upper limit the tire can safely handle, not the target operating pressure.
- Owner’s manual and tire placard: Primary sources for model-year-specific inflation numbers and guidance.
- Tire changes and load variations: Adjust pressures after significant changes in load, wheel size, or tire type, and recheck with a gauge.
In practice, rely on the placard for the recommended targets and use the TPMS readout for ongoing monitoring, consulting the manual for any model-year quirks or changes.
Summary
To recap, your Honda Accord’s tire pressure information is found on the driver’s door jamb placard (for the recommended cold PSI) and on the TPMS readout in the instrument cluster or information display (for current pressures). If you need precise numbers or steps tailored to your exact year and trim, consult your owner's manual or contact a Honda dealer. Regularly checking with a gauge helps ensure safe, efficient driving and prolong tire life.