The paint code for a Chrysler is typically a small alphanumeric code located on the vehicle’s data sticker—most often on the driver’s door jamb. If it isn’t there, you’ll usually find it in the glove box label or on an older model’s fender/body tag. Use this code to order correct touch-up paint or a full repaint match.
This article explains the common places to look, how to read the code, and what to do if you can’t locate it. It covers modern Chrysler models as well as older Mopar vehicles, so you’ll know where to check regardless of year.
Where to look for the paint code
Here are the most reliable places to locate the exterior paint code on Chrysler vehicles. Start with the door jamb sticker, then move to supplemental labels if needed.
- Driver’s door jamb data sticker (the edge of the door or the door frame). Look for a label that lists EXTERIOR COLOR or PAINT along with a short 2–3 character code.
- Inside the glove box label. Some models place the paint color code on the same label as the VIN and trim information.
- Engine bay/radiator support tag (older Chrysler models). A few older builds list the paint code on a tag near the front of the engine compartment.
- Body or fender tag (older or specialty builds). Mopar vehicles from earlier eras sometimes show the color on a tag mounted inside the fender or near the door hinge.
- Rear trunk or cargo area sticker (rare, but possible on some models). Check the data plate in the cargo area if the other locations don’t yield results.
If your vehicle is newer, the door jamb sticker remains the most dependable source; however, the exact placement can vary by year and model, so checking multiple labels is a good idea.
What the paint code looks like and how to read it
On Chrysler vehicles, the exterior color code is usually a short sequence of 2–3 characters, sometimes combination of letters and numbers. The code itself isn’t the full color name; it’s a reference used by the dealer and paint suppliers to mix the exact factory color. Once you have the code, you’ll use it to order touch-up paint, spray cans, or a full-color match with the vendor or dealer.
Because codes vary by model year and region, it’s best to cross-reference the code with official Mopar color charts or confirm with a dealer if you’re unsure about the corresponding shade.
What to do if you can’t locate the code
If you’ve checked the common locations and still can’t find the paint code, use these steps to retrieve it through official channels.
- Locate your VIN (Vehicle Identification Number). It’s on the windshield data sticker, the driver’s door jamb, and registration documents.
- Contact a Chrysler/Fiat brand dealer’s service or parts department and provide the VIN. They can look up the exact exterior color code in the OEM database.
- Ask for the color code or the exact paint name and code when ordering touch-up paint or a spray can. The dealer can also verify the match using your model year and trim.
- If you’re researching online, use trusted Mopar resources or the dealer’s official color chart. Be cautious with third-party sites that request payment for VIN-based color retrieval.
The dealer route is typically the fastest and most reliable way to confirm the exact Chrysler paint code, especially for rare or region-specific colors.
Using the paint code: practical next steps
Once you have the code, you can order the correct touch-up paint, subscribe to color-matching services, or request a color-matched spray can. Many dealers offer official paint chips or digital color matching tools that align with your vehicle’s code. When ordering, share the year, make, model, and trim level along with the paint code to ensure an exact match.
Additional tips for classic or nonstandard Chryslers
Classic Mopar restorations may use Fender Tags with color information that differs from modern VIN stickers. If you’re restoring a vintage Chrysler, consult a classic Mopar resources guide or a specialist shop that can interpret the Fender Tag data for you.
Summary
For most Chrysler vehicles, the exterior paint code is found on the driver’s door jamb sticker, often labeled as EXTERIOR COLOR and presented as a 2–3 character code. If it isn’t there, check the glove box label, the engine bay tag on older models, or a fender/body tag. When in doubt, contact a Chrysler dealer with your VIN to retrieve the exact color code, then use that code to order the correct touch-up paint or paint match. With the code in hand, you’ll be able to achieve a precise color Match for maintenance or restoration.