The quickest answer: check the driver's door jamb sticker—the exterior paint code is printed there as a short alphanumeric string.
Where to look on your Civic
To locate the paint code quickly, start with the most common spots and then check alternate labels if needed.
- Driver’s-side door jamb label (the standard location): look for a section labeled Exterior Paint or COLOR with a short code.
- Inside the door edge or near the latch on the same door: some trims place the color code in a secondary spot on the door jamb.
- Trunk lid or spare tire well label: on a few Civic configurations, a second label may appear in the trunk area or on the spare wheel cover.
If you still can’t locate the color code after checking these spots, you can use the vehicle’s VIN to confirm the color code with a dealer or Honda’s official resources.
Understanding the paint code and how to use it
Once you’ve found the code, you’ll need to understand its purpose and how to use it for matching paint.
- The color code is typically a short alphanumeric string (often 2–3 characters). It identifies the exact exterior color used by Honda for that year and trim.
- The code alone may not read as a common color name; dealers or Honda color charts translate the code into the official color name and formulation.
- When ordering touch-up or spray paint, provide the code (and your VIN if required) to the dealership’s parts department to ensure an exact match.
Tip: If you’re unsure about the shade after you find the code, ask the dealer to show you the corresponding color chip or chart to confirm the match before purchasing paint.
Extra steps to verify the match
For best results, compare the paint in daylight and, if possible, request a physical paint chip from the dealer to confirm the shade before committing to a larger repair.
If you can’t find the code or need extra help
If location attempts don’t yield a result, use the vehicle identification number (VIN) to have a dealer or Honda Parts department look up the exact paint code. You can also visit Honda’s official owner resources or contact your local dealership for direct assistance.
For accuracy, always rely on the official color code associated with your specific VIN and model year. Mismatches can occur if the car has undergone repainting or panel replacements with non-original colors.
Summary: The exterior paint code for a 2020 Honda Civic is most reliably found on the driver’s door jamb label as a short alphanumeric code. If not visible there, check secondary labels in the trunk or glove box area, or use the VIN to verify with a dealer. Use the code to obtain the exact color name and match when ordering touch-up or spray paint, and verify the shade with physical color chips if possible.
How do I find my Honda Civic paint code?
How to find the right paint color for your Honda
- Look in the driver's side door jamb.
- Check inside the engine bay near the firewall.
- Check on the firewall inside the engine bay.
- It may be located on the passenger's side, in the middle, or on the driver's side of the engine bay.
Will my VIN number tell me my paint color?
Does My VIN Number Include Paint Code? No, your VIN number doesn't contain your car's paint code. Instead, this is a unique vehicle identifier assigned by the manufacturer which can be used to check a car's details. Learn more about your car's VIN, and how to read it, in our comprehensive guide.
How can I tell what color my Honda is by VIN number?
More About Honda Color Codes
Honda paint codes are usually on the driver-side door jamb label. The color ID tag often contains the paint code and a factory code. The factory code typically appears on the lower right hand corner of the color ID tag. The factory code is also the eleventh digit of the vehicle VIN.
Where can I find the paint code on a 2020 Honda Civic?
That is your color code for this vehicle. So that is the code that you would need to take. And have for a paint shop to be able to match. The paint to your vehicle.