The bolt pattern for a 2017 Honda Civic is 5x114.3 mm (five lug holes on a 114.3 millimeter circle). This configuration is standard across the 10th-generation Civic (2016–2021).
Understanding the bolt pattern
The bolt pattern, or bolt circle, describes how many lug studs are used and the diameter of the circle those studs form. For the 2017 Civic, five studs sit around a circle with a 114.3 mm diameter, ensuring wheels with matching bolt patterns fit properly.
Additional wheel specs to check
Beyond the bolt pattern, wheels must also match the hub size, thread pitch, and offset to fit safely. The common companion specs for the Civic are listed below.
Key specifications commonly paired with the 5x114.3 mm bolt pattern on the 2017 Civic:
- Bolt pattern: 5x114.3 mm
- Center bore: 64.1 mm
- Lug nut thread size: M12x1.5
- Typical wheel offset: ET40–ET48 (varies by trim and wheel design)
These figures are typical for most 2017 Civics, but exact values can vary by trim or aftermarket components. Always confirm with your wheel vendor or dealer for your specific vehicle.
How to verify on your vehicle
If you want to double-check before buying wheels, use these steps to confirm the bolt pattern and related specs.
- Check the owner's manual or the vehicle's VIN-based specification sheet for your exact trim.
- Inspect the wheel hub for stamped numbers that indicate bore size and pattern.
- Ask a dealer or reputable tire shop to verify using your VIN; they can pull precise fitment data.
Verifying these details helps ensure proper fitment, performance, and safety when replacing wheels or upgrading tires.
Summary
For a 2017 Honda Civic, the standard bolt pattern is 5x114.3 mm—five lug holes arranged on a circle with a diameter of 114.3 millimeters. Accompanying specs typically include a 64.1 mm center bore, M12x1.5 lug threads, and an offset around ET40–ET48. Always confirm your exact trim and wheel choice to ensure compatibility.