Short answer: Dodge has not produced a factory 5x5 bolt pattern in any model year. If you encounter a 5x5 specification, it is typically aftermarket or a misreported pattern rather than a Dodge factory standard.
To understand this question in more detail, it helps to know how wheel bolt patterns are defined, which Dodge lines use which patterns, and how to verify your vehicle’s actual pattern. This article outlines the Dodge bolt-pattern landscape and how to approach a 5x5 inquiry with confidence.
Dodge bolt-pattern basics
Understanding bolt patterns involves knowing the two parts of the designation: the number of bolts and the diameter of the circle they form. For example, 5x115 means five bolts equally spaced on a circle with a 115 mm diameter (about 4.53 inches). Mopar patterns have varied across era and model, so identifying the precise spec for a given car is essential before buying wheels.
What bolt pattern means
The bolt pattern is the layout of the wheel studs. It is usually listed as "X by Y" (X = number of bolts; Y = diameter of the bolt circle). The diameter can be written in millimeters or inches. Accurate measurement ensures wheel compatibility and safe installation.
Common Dodge patterns today
Below are the patterns most commonly associated with Dodge vehicles in recent years. This helps distinguish what is typical versus the requested 5x5 configuration.
- 5x115 mm (5 on 4.53 inches): widely used on modern Dodge passenger cars based on the LX platform, including Charger, Challenger, and 300 from the mid-2000s to present.
- 5x139.7 mm (5 on 5.5 inches): used on Ram pickups and many related light trucks in recent decades.
- 5x127 mm (5 on 5.00 inches): not a standard Dodge factory pattern in modern production and is not commonly used by Mopar; if seen, it is usually aftermarket or misreported.
Note: Older Dodges and some non-LX era vehicles used different patterns (including 5x114.3 mm or other configurations). Always confirm the exact pattern for a specific model year and trim.
How to verify your Dodge bolt pattern
Before purchasing wheels or adapters, confirm your vehicle’s bolt pattern using reliable sources or measurements.
- Check the owner's manual or the official service documentation for wheel specifications.
- Measure the bolt pattern directly: count the lugs and measure the distance across the lug circle.
- Consult a dealer or a trusted wheel-compatibility guide with the exact year, make, and model.
Accurate verification helps prevent fitment issues and ensures safety. If a vendor markets a 5x5 Dodge bolt pattern, request precise measurements (in both metric and imperial units) and verify against your vehicle data.
Summary
There is no Dodge model year with a native 5x5 bolt pattern. The most common modern Dodge patterns are 5x115 mm for passenger cars (Charger, Challenger, 300) and 5x139.7 mm for Ram trucks. If you need a 5x5 setup, it would typically involve an adapter kit, which carries considerations for safety and warranty and should be used with professional guidance.
Overall, for Dodge enthusiasts and wheel shoppers, a true factory 5x5 bolt pattern does not exist as of 2026. Always verify with official specifications for your exact vehicle to avoid misinterpretation or incompatible wheel purchases.