The 2019 Honda Pilot requires 0W-20 synthetic motor oil for its 3.5-liter V6 engine, with an oil capacity of about 5.7 quarts (including the filter). Oil changes should follow Honda’s Maintenance Minder system to determine when service is needed.
Oil Type and Specifications
Viscosity and grade
Use 0W-20 viscosity for normal operation across a wide temperature range. This lightweight synthetic helps with cold-start lubrication and fuel efficiency while protecting engine wear.
Certifications and compatibility
Choose oil that meets API SN or newer and ILSAC GF-5 or GF-6 specifications. Honda Genuine oils or reputable brands that meet these standards are suitable choices for the Pilot.
Capacity and Maintenance Guidance
Key specs and practical guidance about how much oil to use and how to maintain it are listed below.
- Oil capacity (with filter): about 5.7 quarts (5.4 liters)
- Recommended oil: 0W-20 synthetic
- Brand options: Honda Genuine or any equivalent that meets API SN/newer and ILSAC GF-5 or GF-6
After adding oil, recheck the level with the dipstick and reset or follow the vehicle’s Maintenance Minder prompts to ensure accurate service scheduling.
Maintenance Intervals
The 2019 Pilot uses Honda’s Maintenance Minder system to indicate when an oil change is due. Under normal driving, oil changes are typically scheduled around every 7,500 miles, but severe driving conditions (heavy towing, frequent short trips, extreme heat or cold) may require more frequent changes. Always consult the owner's manual or your dealer for your specific driving pattern.
Summary
In short, you should use 0W-20 synthetic oil for the 2019 Honda Pilot, about 5.7 quarts per oil change, and rely on the Maintenance Minder to determine exact intervals. Use a trusted brand that meets API SN/newer and ILSAC GF-5 or GF-6 specs to keep the engine running smoothly.