The oil type you need depends on the engine in your Renegade: the 2.4-liter Tigershark typically uses 0W-20 synthetic, while the 1.4-liter MultiAir Turbo usually requires 5W-40 synthetic. Always confirm with your owner's manual or vehicle identification details.
The 2017 Jeep Renegade was offered with two main engines in various markets: a naturally aspirated 2.4L Tigershark and a turbocharged 1.4L MultiAir. Oil specifications can vary slightly by region and production batch, and following the correct grade is important for warranty coverage and engine longevity. Below is a detailed look at the oil requirements by engine and practical notes for owners.
Engine oil recommendations by engine
2.4L Tigershark engine
Oil type: SAE 0W-20 full-synthetic motor oil. This grade is commonly specified for the 2.4L Tigershark in the Renegade and aligns with Chrysler/Jeep recommendations for this engine family. Use a high-quality synthetic and follow the maintenance schedule outlined in the manual.
1.4L MultiAir Turbo engine
Oil type: SAE 5W-40 full-synthetic motor oil. The turbocharged 1.4L MultiAir Turbo typically requires a synthetic 5W-40 to help manage heat and turbo performance. As always, verify the exact grade on the fill cap or in the owner’s manual for your VIN.
Note: Some regional specs may differ slightly. If you have access to the vehicle’s oil fill cap or a recent service bulletin, those sources should take precedence over general guidance. When in doubt, consult a Jeep dealership or the official owner’s manual for the exact specification for your vehicle.
In addition to selecting the correct oil grade, use a quality full-synthetic oil and replace the oil and filter at the intervals recommended by Jeep, which can vary based on driving conditions, climate, and mileage. Regular oil level checks are advisable, especially in extreme temperatures or high-stress driving.
Common questions and answers
Q: Do I need to stick to synthetic oil for my Renegade? A: For these engines, synthetic oils are strongly recommended for best protection and performance, though always verify the grade specified for your engine variant. Q: Does the oil grade change by region? A: It can; always check the owner’s manual or the oil fill cap for your specific vehicle’s specification.
Conclusion
For a 2017 Jeep Renegade, oil type is engine-dependent: 0W-20 synthetic for the 2.4L Tigershark and 5W-40 synthetic for the 1.4L MultiAir Turbo. Always confirm with the owner’s manual or your dealership, and adhere to the recommended change intervals to maintain performance and warranty coverage.
Summary: The 2017 Renegade requires 0W-20 synthetic oil for the 2.4L engine and 5W-40 synthetic oil for the 1.4L turbo. Verify your engine variant and follow the manual’s guidance to ensure proper protection and compliance with service intervals.