A concise answer: use SAE 0W-20 full synthetic oil for the 2.5-liter four‑cylinder engine, and SAE 5W-30 full synthetic oil for the 3.5-liter V6.
This article breaks down the official oil specifications for the two available engines in the 2013 Camry, including recommended oil grades, capacities, and general maintenance intervals. Always verify with your owner's manual or a Toyota dealer for your VIN and local conditions.
Engine options and oil specifications
2.5L 4-Cylinder (2AR-FE) oil requirements
The four‑cylinder Camry is designed to run on a light, synthetic oil that improves efficiency and cold-start performance.
The following list summarizes the official recommendations for this engine:
- Oil type: SAE 0W-20 synthetic (full synthetic recommended)
- Certifications: API SN or newer, ILSAC GF-5
- Capacity (with filter): approximately 4.6 quarts (about 4.4 liters)
In brief, the 2.5L Camry uses 0W-20 synthetic oil and roughly 4.6 quarts per change, requiring adherence to the vehicle’s oil life monitor or service schedule.
3.5L V6 (2GR-FE) oil requirements
The V6 Camry uses a slightly heavier synthetic oil to accommodate higher operating temperatures and loads.
The following list summarizes the official recommendations for this engine:
- Oil type: SAE 5W-30 synthetic (full synthetic recommended)
- Certifications: API SN or newer, ILSAC GF-5
- Capacity (with filter): approximately 6.4 quarts (about 6.0 liters)
In brief, the 3.5L Camry requires 5W-30 synthetic oil and about 6.4 quarts per oil change, with intervals guided by the vehicle’s monitoring system or manual.
Oil change intervals and maintenance reminders
Maintenance timing for the 2013 Camry is driven by Toyota’s Oil Life Monitoring System in many trims. In normal driving, oil changes typically fall within roughly 5,000–10,000 miles, depending on oil type and driving conditions. Severe driving (short trips, heavy loads, extreme heat) usually calls for more frequent changes. Always rely on the Oil Life Monitor or the owner’s manual for the exact interval.
Keeping the recommended oil grade and following the advised change schedule helps protect the engine and maintain performance.
Summary
The 2013 Toyota Camry offers two engine options with distinct oil specs: 0W-20 synthetic oil for the 2.5L four‑cylinder and 5W-30 synthetic oil for the 3.5L V6. Oil capacities are approximately 4.6 quarts for the four‑cylinder and 6.4 quarts for the V6. Use Toyota’s Oil Life Monitor or the owner’s manual to determine precise change intervals based on your driving conditions.
Can I put 5W-30 in my Toyota Camry?
Both the 2.4-liter four-cylinder and 3.0-3.3-liter V6 engines commonly specified 5W-30, though late-model years began transitioning toward 0W-20. Ready for professional Camry service? Schedule your oil change at Oil Changers where we stock all Toyota-specified oil grades.
What Camry has the nicest interior?
Which Camry trim offers the most premium interior options? Luxury is best experienced in person, and the XLE and XSE have by far the most premium Toyota Camry interior upgrades.
What oil should I use for a 2013 Toyota Camry?
2012 to 2017 Camrys
0W-20 synthetic oil flows more easily during cold starts, helps reduce engine friction, and contributes to better fuel economy across the board. Toyota's maintenance schedule during this generation recommends oil changes every 10,000 miles or 12 months under normal driving conditions.
What year has the fastest Camry?
The Fastest Toyota Camry: Camry TRD
Although it was only around for half the generation, from 2020 to 2023, the Camry TRD quickly took the distinction of being the fastest Camry that Toyota had ever built. Toyota got the message across not just through power, but by looks.