The Crosstour generally requires a 5W-20 synthetic oil, with 0W-20 acceptable in very cold climates. Always confirm by checking your owner's manual or the oil filler cap, as exact requirements can vary by year and engine.
This article explains the oil types and specifications for the Honda Crosstour, which was offered with two engines during its production run (2009–2015): the 2.4-liter inline-4 and the 3.5-liter V6. It also outlines how to choose the right viscosity, what standards the oil should meet, and practical steps for maintenance to keep the vehicle running smoothly.
Engine options and oil requirements
There are two primary engines in the Crosstour lineup, and while their oil needs are similar, you should verify the exact grade for your specific year and engine using the manual or the oil cap.
- 2.4L inline-4 engine: Typically calls for 5W-20 synthetic oil meeting ILSAC GF-5 (or GF-6) with API SN (or newer) certification. In very cold climates, 0W-20 may be acceptable if specified by Honda for your model year.
- 3.5L V6 engine: Also generally uses 5W-20 synthetic oil meeting ILSAC GF-5 (or GF-6) with API SN (or newer). Some climates or years may allow 0W-20; check your manual for the exact requirement.
Concluding note: Always verify the exact viscosity and spec for your Crosstour by consulting the owner’s manual, the oil filler cap, or your local Honda dealer, since specifications can vary by model year and market.
Oil change intervals and brand guidance
To keep your Crosstour running well, follow the recommended interval and choose a quality oil that meets the listed specs. The list below provides a practical guide to planning changes.
Below are general maintenance steps to consider when planning an oil change, including selection and verification of grade, service interval, and documentation of the specification on the oil cap/manual.
- Identify your exact engine and model year to confirm the correct grade (5W-20 or 0W-20) and certification (ILSAC GF-5/GF-6, API SN or newer).
- Choose a high-quality synthetic or synthetic blend that meets the above specification on the bottle.
- Follow the recommended service interval from Honda for your climate and usage (often around 5,000–7,500 miles with synthetic oils, but check your manual).
- Use a compatible oil filter and torque the drain plug to the manufacturer's specification when performing a change.
- Maintain documentation of the oil type, grade, and change date for future reference and resale value.
Concluding paragraph: Adhering to the correct oil grade and change interval is key to extending the Crosstour’s engine life and maintaining performance across its years of production.
Summary
For most Honda Crosstour models (2009–2015) the standard recommendation is 5W-20 synthetic oil, with 0W-20 acceptable in very cold climates if your year and manual permit it. Always confirm the exact grade and certification (ILSAC GF-5 or GF-6, API SN or newer) by checking the owner’s manual or the engine oil cap. Use a high-quality synthetic or synthetic-blend oil and change it at the interval specified for your climate and driving conditions. This ensures optimal lubrication, efficiency, and longevity for both the 2.4L I4 and 3.5L V6 Crosstour engines.