The 2017 Jeep Patriot typically uses SAE 5W-20 motor oil that meets API SN and ILSAC GF-5 specifications, and it should be Chrysler MS-6395 compliant. This standard applies to the common engines in that year’s Patriot; always verify with your owner’s manual or the under-hood label.
In practice, the Patriot offered two engines in 2017—the 2.0-liter World I4 and the 2.4-liter Tigershark I4—and both generally follow the same viscosity guidance. You can use a synthetic-blend or full synthetic oil as long as it meets the MS-6395 specification and provides API SN/ILSAC GF-5 performance. In extremely hot climates or under heavy load, consult the manual for any climate-specific allowances, but the official recommendation remains 5W-20 for these engines.
Engine oil recommendations by engine
Below is a quick reference for the two engines that were available in the 2017 Patriot, focusing on the standard viscosity and required specifications.
- 2.0L World I4 — 5W-20; oil should meet API SN or higher, ILSAC GF-5; Chrysler MS-6395 compliant; synthetic-blend or full synthetic allowed.
- 2.4L Tigershark I4 — 5W-20; oil should meet API SN or higher, ILSAC GF-5; Chrysler MS-6395 compliant; synthetic-blend or full synthetic allowed.
In short, both engines use the same viscosity and specification standards, so you can apply the same oil choice across the lineup. Always double-check your exact VIN in the manual if you’re unsure.
Oil quality, specifications and service notes
When selecting oil, keep these guidelines in mind to ensure compatibility and performance.
- Viscosity: 5W-20 is the standard recommendation for the 2017 Patriot; 5W-30 may be acceptable in certain conditions only if specified by your manual.
- Specifications: Oil should meet API SN or higher and ILSAC GF-5, and should also meet Chrysler MS-6395 requirements.
- Oil type: Conventional, synthetic-blend, or full synthetic oils are permitted; many owners opt for full synthetic for longevity and cold-start protection.
Always follow the exact specification listed in your owner’s manual and the oil fill cap on the engine to ensure proper performance and warranty compliance.
Summary: For a 2017 Jeep Patriot, the typical oil specification is SAE 5W-20 that meets API SN/ILSAC GF-5 and Chrysler MS-6395. This applies to both the 2.0L and 2.4L engines; verify with your manual, and choose synthetic-blend or full synthetic oil that meets the MS-6395 standard. Check the owner's manual for exact capacity and change intervals.