The 2016 Honda CR-V takes 0W-20 synthetic motor oil.
For the 2.4-liter i-VTEC engine used in most 2016 CR-V models, Honda specifies 0W-20 full synthetic oil that meets API SN or later and ILSAC GF-5 or newer. Using the recommended viscosity helps with fuel efficiency, cold-start protection, and overall engine longevity. Always check your owner's manual or consult a Honda dealer for the exact specification in your region, as there can be minor regional variations.
Recommended oil and specifications
Here is a concise guide to the oil specification you should use for the 2016 CR-V. This list captures the official grade and compatibility considerations.
- 0W-20 synthetic motor oil (full synthetic preferred) that meets API SN or later and ILSAC GF-5 or newer, suitable for the 2.4-liter i‑VTEC engine.
Using the properly rated oil supports engine efficiency and protection across temperatures. If you are unsure, verify with the owner's manual or a Honda service advisor before purchasing.
Why 0W-20 and what it means
0W-20 is a low-viscosity oil designed to flow quickly at cold starts and maintain protection at normal operating temperatures. Honda adopted 0W-20 for newer CR-Vs to maximize fuel economy and reduce engine wear. The oil's API SN or later and GF-5 (or newer) specification ensures compatibility with the engine's seals and additives.
Oil change practicals
Practical notes to help you manage oil changes on a 2016 CR-V include target oil type, typical capacity, and a quick check routine.
- Oil type: 0W-20 synthetic (full synthetic preferred) meeting API SN or later and ILSAC GF-5 or newer.
- Notes: Always use a fresh filter; avoid mixing brands; follow Honda's service interval for when to change the oil (often every 7,500 miles/12 months under normal driving, but this may vary by climate or driving conditions).
Consult the owner’s manual for exact capacity and change interval for your specific vehicle and region, and consider a dealer or mechanic if you regularly drive in severe conditions.
Summary
In short, a 2016 Honda CR-V with the 2.4L engine requires 0W-20 synthetic motor oil, ideally full synthetic and meeting API SN or later and ILSAC GF-5 or newer. Use the cited grade consistently and replace with the recommended amount at service intervals to preserve performance and efficiency.
What oil should I put in my 2016 Honda CRV?
The experts agree that the only types of oil suitable for the Honda CR-V engine are synthetic 0W-20 and 0W-30 grades.
Can I use 5w20 instead of 0w20 Honda CR-V?
Using 5W-20 instead of Honda's recommended 0W-20 won't cause immediate damage but may impact fuel economy and cold-start protection. The “0W” rating ensures better flow during cold starts, crucial for turbo bearing lubrication and variable valve timing operation.
Which engine oil is best for a Honda CR-V?
To get the best results, your Honda CR-V oil type needs synthetic 0w-20 or 0w-30 rated oil. Synthetic oil is the top choice because it's highly durable and can handle high temperatures.
Which CRV is the fastest?
When it comes to speed and acceleration, the Honda CR-V stands out as the fastest SUV in Honda's lineup, particularly the Hybrid Sport Touring model. This version achieves a remarkable 0 to 60 mph time of approximately 7.7 seconds, which is impressive among compact SUVs.