The 2017 Audi A4 typically requires a fully synthetic engine oil that meets Volkswagen/Audi specification VW 502 00. In practice, most owners use either 5W-40 or 0W-40 depending on climate and the exact engine variant. Always verify the exact requirement in your owner's manual or on the oil filler cap.
Oil specifications for the 2017 Audi A4
Understanding the oil spec matters because it affects engine protection, fuel economy, and long-term reliability. Most gasoline A4 configurations from this era share the VW 502 00 specification, while diesel variants may call for different approvals. The recommended viscosity is usually 5W-40, with 0W-40 used in very cold climates or on certain market specifications. Check your VIN-specific manual to confirm the precise requirement for your car.
Gasoline vs. diesel considerations
For the common 2017 A4 with a 2.0-liter TFSI gasoline engine, the standard guidance is to use a fully synthetic oil meeting VW 502 00, most often in 5W-40 or, in colder climates, 0W-40. Diesel versions and some markets may require VW 507.00 or another approved specification. Always verify which specification applies to your engine and market.
Here are the typical viscosity options used in practice for this model, depending on climate and engine variant:
- 5W-40 synthetic oil that meets VW 502 00
- 0W-40 synthetic oil that meets VW 502 00 (useful in very cold climates)
Conclusion: The right oil depends on your engine variant and climate. Use a synthetic oil that meets VW 502 00 and follow the viscosity recommended in your manual. If in doubt, consult an Audi/MVW service professional.
To ensure you select the exact oil spec for your car, use the steps below to verify the specification for your VIN and market.
Here is how to confirm the exact oil spec for your vehicle:
- Check the owner's manual in the Engine Oil section for the required specification (VW 502 00) and the recommended viscosity for your engine and climate.
- Inspect the engine oil filler cap; it often lists the preferred viscosity (for example, 5W-40 or 0W-40).
- Review the maintenance/service label in the engine bay or the onboard display to see the recommended oil spec for your model.
- If you’re unsure, contact an authorized Audi dealer or service center with your VIN to confirm the exact specification.
Conclusion: Once you’ve confirmed the exact spec, use a fully synthetic oil that meets VW 502 00 with the viscosity appropriate for your climate and engine configuration.
Summary
For the 2017 Audi A4, the standard requirement is a fully synthetic oil that meets VW 502 00, with common viscosities of 5W-40 or 0W-40 depending on climate and engine variant. Always verify the precise specification in your owner's manual or via your dealer, as market-specific variances can apply. Using the correct oil helps protect the engine, maintain performance, and preserve warranty coverage.