Short answer: The 2016 Accord uses 0W-20 full synthetic oil for the 2.4L four-cylinder engine, and 5W-20 full synthetic oil for the 3.5L V6 engine. Always verify with the owner's manual or the under-hood sticker.
Engine options and oil requirements
The 2016 Accord was offered with two engines, each with its own oil specification. Use this quick reference to match your engine to the recommended grade.
- 2.4L four-cylinder engine: 0W-20 full synthetic oil
- 3.5L V6 engine: 5W-20 full synthetic oil
Note: Always verify the exact specification for your car; variations can occur by market or trim. The owner's manual or under-hood label provides the definitive grade.
Oil capacity and change intervals
Here is a compact guide to how much oil your Accord holds and how often to change it, depending on the engine.
- 2.4L four-cylinder: Oil capacity with filter ≈ 4.5 quarts (4.3 L). Typical change interval with synthetic oil: about every 7,500 miles (12,000 km) under normal driving.
- 3.5L V6: Oil capacity with filter ≈ 5.7 quarts (5.4 L). Typical change interval with synthetic oil: about every 7,500 miles (12,000 km) under normal driving.
Factor in climate, driving conditions, and usage, which can affect recommended intervals. Always follow the schedule specified in the owner’s manual.
How to confirm your exact specification
Where to look and what to check
Check the under-hood oil cap and the vehicle information label, or consult the owner’s manual to confirm the precise oil grade for your specific car. If unsure, a Honda dealership or certified mechanic can verify the correct specification for your VIN.
Summary
For the 2016 Honda Accord, the correct oil depends on the engine: 0W-20 synthetic for the 2.4L engine and 5W-20 synthetic for the 3.5L V6. Use the specified capacity and follow the service schedule in the manual, adjusting for climate and driving conditions. Always verify with the manual or sticker to ensure accuracy.