SAE 0W-20 engine oil is required for the 2010 Camry LE’s 2.5-liter engine, with a typical oil capacity of about 4.5 quarts (4.3 liters) including the filter. The V6 version uses 5W-30. Always consult the owner's manual or your dealer for the exact specification for your vehicle.
The 2010 Camry lineup includes both a 2.5-liter four-cylinder model and, in some trims, a 3.5-liter V6. This article outlines the official oil recommendations for each engine and offers practical notes on choosing oil and performing changes.
Engine-specific oil requirements
2.5L 4-cylinder engine (Camry LE)
Before listing the official guidance for this engine, note that the following applies to the standard Camry LE equipped with the 2.5-liter engine.
Here are the official guidelines for the 2.5L Camry LE's oil requirements:
- Oil viscosity: SAE 0W-20
- Oil type: Synthetic blend or full synthetic that meets API SN/ILSAC GF-5
- Oil capacity: About 4.5 quarts (4.3 liters) with filter
- Recommended filter change with every oil change
Bottom line: Use 0W-20 synthetic oil and replace the filter with every oil change for the 2.5L Camry LE.
3.5L V6 engine (if equipped)
Some 2010 Camry trims offered the 3.5-liter V6. If your Camry has this engine, refer to the owner's manual for the exact oil specification, but typical guidance is:
- Oil viscosity: SAE 5W-30
- Oil type: Synthetic blend or full synthetic meeting API SN/ILSAC GF-5
- Oil capacity: About 6.5 to 6.6 quarts with filter (varies by model year and drivetrain)
Always confirm the exact spec for your vehicle's engine from Toyota's manual or dealer, as exact capacity can vary by configuration.
Summary
For most 2010 Camry LE models with the 2.5L engine, use SAE 0W-20 engine oil (synthetic or synthetic blend) in about 4.5 quarts with a new filter. If you have the 3.5L V6, use 5W-30 as the standard oil. Check the owner's manual or consult a Toyota dealer to confirm the precise specification for your vehicle and local operating conditions.