Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What type of headlight does a 2007 Toyota Camry take?

The 2007 Camry’s headlights are typically halogen units in most trims.


Most configurations use low-beam bulbs of type H11 and high-beam bulbs of type 9005 (HB3). Some higher-trim models or regional versions offered optional HID (xenon) headlights, which use a ballast-driven system rather than conventional halogen bulbs. To be certain, check the owner’s manual, inspect the headlight housing markings, or confirm with the dealership for your exact VIN configuration.


What to expect by trim and market


Because Toyota offered lighting options across trims and regions, here is a quick guide to the most common setups you’re likely to encounter on a 2007 Camry.



  • Standard halogen reflector headlights on most trims, using low-beam H11 bulbs and high-beam 9005 bulbs.

  • Optional HID headlights on select trims or regional editions, which use ballast-driven xenon bulbs instead of halogen lamps.

  • Fog lights (where equipped) typically use separate bulbs such as H11, though this varies by package and market.


Bottom line: for most 2007 Camrys, you’ll be dealing with halogen bulbs (H11 low-beam, 9005 high-beam). If your vehicle has HID, it uses a different bulb type with a ballast. Always verify with official documentation or a qualified technician for your exact configuration.


How to verify or replace bulbs


To confirm your exact bulb type and safely replace it, follow these steps.



  1. Consult the owner’s manual or the inside of the headlight cover for bulb type markings.

  2. Turn off the ignition, open the hood, and locate the headlight housing to identify the low-beam and high-beam sockets.

  3. Disconnect power if necessary and carefully remove the old bulb while noting orientation and connectors.

  4. Match the bulb base and size (for example, H11 for low beam, 9005 for high beam) or confirm HID ballast specifications if applicable.

  5. Install the correct replacement bulb, reconnect wiring, test the headlights, and reassemble any covers securely.


Tip: If you’re unsure about your exact bulb type, bring the old bulb to an auto parts store or contact a Toyota dealer with your VIN to ensure a precise match.


Summary


In summary, a 2007 Toyota Camry most commonly uses halogen headlights with H11 low-beam and 9005 high-beam bulbs. HID headlights were offered on some trims, but not universally. Always verify the exact configuration for your vehicle through the manual, VIN, or a dealer to ensure you buy the correct bulbs for replacement.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.