Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What type of headlight bulb does a 2010 Ford Focus take?

Typically, a 2010 Ford Focus uses H7 bulbs for the low beams and 9005 bulbs for the high beams, with H11 bulbs for fog lights where equipped. However, bulb specifications can vary by market and trim, so check your owner’s manual or the headlight housing label to confirm.


Common bulb configurations


Here is a quick reference for the most common configuration found on 2010 Focus models. Use this as a baseline, but verify on your specific vehicle before purchasing replacements.



  • Low beam: H7

  • High beam: 9005 (HB3)

  • Fog lights (if equipped): H11


These are typical configurations for many 2010 Focus models, though regional or trim differences can apply. Always confirm with your car’s documentation or by inspecting the socket itself before buying bulbs.


How to confirm the bulb type on your car


To be certain, consult the owner’s manual, check the bulb specification label on the back of the headlight housing, or remove the existing bulb to compare its base. You can also reference Ford’s parts catalog using your VIN or visit an auto parts store with your vehicle to match the bulb type.


Replacement steps


General steps to replace a headlight bulb:



  • Safety first: disconnect the battery if required and avoid touching hot components.

  • Open the hood and locate the headlight assembly.

  • Twist the bulb socket counterclockwise to release it, then carefully pull out the old bulb.

  • Install the new bulb, ensuring the connector fits snugly and the bulb is seated correctly.

  • Reconnect wiring, reassemble any covers, and test the headlights before driving.


Tips: Handle bulbs with clean gloves or a cloth to avoid oils from your skin on the glass, which can reduce bulb life. Make sure seals and dust covers are properly resealed after replacement.


Regional variations and additional tips


While H7 for low beams, 9005 for high beams, and H11 for fogs are common, some markets or trims may differ due to supplier changes or variations in headlamp design. If your Focus has been upgraded with HID or LED assemblies, the bulb types may differ or the old bulbs may no longer apply. When in doubt, verify with the dealership or a trusted automotive parts professional using your vehicle’s VIN.


Summary


For a 2010 Ford Focus, the typical setup is H7 low-beam bulbs, 9005 high-beam bulbs, and H11 fog lights where equipped. Always confirm the exact bulb type with the owner’s manual or the headlight housing label for your specific vehicle, as regional and trim differences can apply.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.