Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What type of battery goes in a 2011 Honda Accord?

The 2011 Honda Accord uses a standard 12-volt lead-acid automotive battery. In most configurations this is a conventional flooded battery, though some owners or dealers may opt for an AGM replacement depending on climate or added electronics. The exact group size—most commonly Group 35 or Group 24F—depends on the engine and trim. Always confirm by checking the current battery label or the owner’s manual.


Battery basics for the 2011 Accord


Automotive electrical systems in the 2011 Accord run on a 12-volt lead-acid battery designed to deliver cold-cranking amps for starting and to support electrical loads when the engine is off. For most owners, a conventional flooded battery suffices, though maintenance-free or AGM options may be chosen for enhanced performance in extreme climates or with additional electrical accessories. The model does not require a high-voltage or specialty battery beyond these standard automotive types.


Engine and trim considerations for battery size


The correct battery group size is tied to the engine and electrical layout. In the 2011 Accord, replacement batteries are typically listed as Group 35 or Group 24F, but the exact specification can vary by engine (4-cylinder vs. V6) and market. The definitive size is printed on the original battery’s label and is published in the owner's manual. If you’re shopping, use your VIN at a parts retailer to pull the exact, compatible option.


To identify the exact battery you need, follow these steps:



  • Check the existing battery: read the label on the top or side for group size, CCA (cold-cranking amps), reserve capacity, and terminal orientation.

  • Consult the owner's manual or a Honda dealership service bulletin for the recommended group size and CCA for your trim and climate.

  • Use your vehicle’s VIN at an auto parts retailer or online tool to pull the exact specification for your car.

  • Verify physical compatibility: measure tray dimensions and ensure the positive/negative terminal positions match your vehicle’s wiring harness and hold-downs.


Once you have the correct battery, consider climate and driving style: in very cold climates or with frequent short trips, you may want a higher CCA rating or an AGM battery for improved reliability and longevity.


Summary: A 2011 Honda Accord uses a standard 12-volt lead-acid automotive battery, with common replacement group sizes around 35 or 24F depending on engine and trim. Always verify the exact spec from the current battery label, the owner’s manual, or a reputable parts retailer using your VIN. Using the correct size and CCA helps ensure reliable starts and consistent electrical performance.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.