The 2014 Jeep Cherokee uses a standard 12-volt automotive battery (lead-acid). This article explains the battery type, what to look for when replacing it, and how to choose the right replacement for your trim and driving conditions.
Battery type and basic specs
The Cherokee typically relies on a 12-volt battery to power the starter and all electrical systems. Most trims use a maintenance-free, flooded lead-acid unit. Some higher-trim configurations or options that include start-stop technology may require an absorbed glass mat (AGM) battery. Always verify the exact specification from the OEM label on the battery or in the owner’s manual.
- 12-volt system standard for the vehicle
- Maintenance-free flooded lead-acid battery is common
- AGM battery may be used on configurations with start-stop or special equipment
- OEM labels and the owner's manual are the best references for exact specs
In short, the Cherokee uses a 12-volt automotive battery, with the exact type (flooded vs AGM) depending on the trim and features. Always confirm via the battery label or the manual when replacing.
Choosing the right replacement
Before replacing the battery, gather information on the correct group size, cold-cranking amps (CCA), and reserve capacity (RC) to ensure the new battery meets or exceeds OEM requirements. Use the owner’s manual or the current battery label as your primary reference.
- Check the battery label for group size, CCA, and RC
- Compare to the OEM specifications listed in the manual
- Determine if AGM is required (start-stop-equipped models or certain options)
- Consider climate and driving patterns to select appropriate CCA/RC
Bottom line: start with the OEM specs, and choose a replacement that meets or exceeds them; opt for AGM if your vehicle’s configuration requires it.
Maintenance and care tips
Keep terminals clean and tight, inspect connections regularly, and monitor the battery’s health as part of routine vehicle maintenance. If you notice slow cranking, dim lights, or electrical issues, test the battery and alternator promptly to prevent unexpected failures.
Summary
The 2014 Jeep Cherokee uses a 12-volt automotive battery, typically a maintenance-free lead-acid unit. Some configurations with start-stop may require an AGM battery. Always verify the exact spec with the battery label or the owner’s manual, and replace with a battery that meets or exceeds OEM ratings for reliability in your climate and driving conditions.