Audi's typical lug pattern for most modern models is a 5-lug bolt pattern on a 112 mm circle (5x112). There are exceptions from older generations, notably the original Audi TT, which used 5x100, and a few early A3 variants. Always verify the exact spec for your vehicle year and model before buying wheels or hardware.
What the bolt pattern means for Audi owners
The bolt pattern (also called PCD) determines how wheels mount to the hub. For Audi, a 5x112 pattern means five lug studs arranged on a circle with a 112 mm diameter. This pattern affects wheel compatibility, center bore fitment, and overall mounting safety. When swapping wheels, matching the correct pattern is essential, and you should also consider center bore size and offset.
Current Audi lineup: which models typically use 5x112?
The following list represents models and generations where the 5x112 bolt pattern is standard in modern times. This is a general guide for typical factory or aftermarket wheel compatibility.
- Audi A3
- Audi A4
- Audi A5
- Audi A6
- Audi A7
- Audi A8
- Audi Q3
- Audi Q5
- Audi Q7
- Audi Q8
- Audi R8
- RS models (e.g., RS 5, RS Q8) also use 5x112
Noting that the vast majority of modern Audis share the 5x112 bolt pattern across body styles and trims. Always confirm the exact spec for your specific vehicle's year, trim, and market.
Notable older-model exceptions
There are confirmed exceptions among older Audi lines, particularly among the brand's earliest generations and niche sports cars, where a 5x100 pattern appeared on some variants.
- Original Audi TT (8N; 1998–2006) – 5x100 bolt pattern
- Certain early A3/A4 variants from the late 1990s to early 2000s used 5x100 patterns
For buyers and enthusiasts, the safest approach is to check the official manufacturer specification for your VIN or measure the existing wheel pattern to ensure wheel compatibility.
Practical implications: buying wheels and tires
The lug pattern matters for wheel compatibility, but so do center bore size and offset. If you choose wheels with a different bolt pattern, you risk improper seating, vibration, or safety issues. When shopping, specify 5x112 for most modern Audis and verify bore size (commonly 57.1 mm or 66.6 mm depending on model) and offset requirements.
Summary
In short, Audi's standard lug pattern across most modern models is 5x112. There are exceptions in older generations, notably 5x100 patterns used by the original TT and some early A3/A4 variants. Always confirm your exact model-year pattern before purchasing wheels or hardware to ensure proper fitment.