The typical front wiper blades for a 2020 Hyundai Tucson are 26 inches on the driver's side and 16 inches on the passenger's side, with a 12-inch rear blade. Sizes can vary by market or trim, so it's wise to double-check before buying replacements.
This article explains the standard blade sizes for the U.S.-market Tucson, notes potential regional variations, and provides steps to confirm the exact blade lengths for your specific vehicle.
Front Wiper Blade Sizes
What follows lists the standard sizes most Tucson owners will need when shopping for front blades.
- Driver's side: 26 inches
- Passenger's side: 16 inches
Note: Some markets or trims may use different lengths, with a small minority of models featuring 18-inch passenger-side blades. Always verify with your vehicle’s manual or the blade packaging before purchase.
Rear Wiper Blade Size
The Tucson uses a single rear wiper blade in most configurations, and its size is typically 12 inches.
- Rear blade: 12 inches
Rear blade lengths can vary by part number or regional model year updates, so checking the packaging or the vehicle’s manual is recommended if you’re unsure.
How to Confirm the Right Size
If you’re uncertain about the exact blade length for your Tucson, follow these quick verification steps.
- Check the owner's manual or the official Hyundai parts catalog for the exact blade sizes recommended for your year and trim.
- Inspect the blades currently installed on your vehicle and measure their lengths from tip to tip when laid flat.
- Use a reputable auto parts retailer’s lookup tool by entering your vehicle’s year, make, and model to confirm compatible blade sizes.
- If in doubt, visit a local auto parts store and bring the blade to verify fitment before purchasing.
Following these steps helps ensure you buy the correct blades and avoid fitment issues or poor performance.
Summary
For a 2020 Hyundai Tucson, prepare front wipers in 26 inches (driver) and 16 inches (passenger) with a 12-inch rear blade as the standard setup. Always verify with the manual, packaging, or retailer to account for regional or model-year differences, and consider replacing both front blades simultaneously for consistent performance.