Front wipers for the 2019 Nissan Frontier are typically 26 inches on the driver’s side and 17 inches on the passenger’s side, with an 11-inch rear blade if your model has a rear window wiper.
These sizes apply to the common Frontier configurations from that year, including crew cab and king cab models. Always verify with your owner's manual or by measuring the blades on your vehicle to account for any trim-specific differences.
Front wiper blade sizes
The standard front blade pair for the 2019 Frontier is a two-blade setup in 26 inches (driver) and 17 inches (passenger).
- Driver-side blade: 26 inches
- Passenger-side blade: 17 inches
Using a matched 26"/17" front blade pair ensures proper sweep coverage and avoids gaps or streaks. If you replace only one blade, try to maintain the same lengths on both sides to preserve balance and performance.
Rear wiper blade size
Rear wiper blades apply only if your Frontier is equipped with a rear window wiper. The typical rear blade length for 2019 Frontier models with a rear wiper is 11 inches.
- Rear blade: 11 inches
If your vehicle does not have a rear wiper, this blade size does not apply. For those with a rear wiper, measure or verify 11 inches to ensure a proper fit.
How to confirm size and replace wipers
To verify exact lengths and perform a replacement, follow these steps:
- Check your owner’s manual or Nissan parts catalog for the exact blade specifications for your trim.
- Measure the current blades with a ruler: length from tip to base for each blade.
- Purchase a matched pair for the front (26" driver, 17" passenger) and an 11" rear blade if applicable.
- Lift the wiper arm away from the windshield and rotate the blade to release the hook or connector.
- Install the new blade by attaching the connector to the wiper arm and ensuring it clicks into place.
- Lower the wiper arm back to the glass and test the sweep on a dry run, then with a light spray of water to check for streaks.
When in doubt, bring the blade sizes to an auto parts store or consult an official Nissan parts diagram to confirm compatibility for your exact vehicle configuration.
Blade types and buying tips
There are beam (frictionless) blades and traditional framed blades. Beam blades tend to offer longer life and better performance in rain and frost, while conventional blades can be less expensive. For the Frontier, either type is generally compatible, but beam blades often provide a cleaner wipe and are a popular upgrade choice.
Notes on variations by trim and region
While 26"/17" front blades and an 11" rear blade cover most 2019 Frontier setups, some markets or trims may have slight differences. If you’re unsure, verify the exact sizes by checking the door jamb or hood underside for part numbers, or reference Nissan’s official parts listings for your VIN.
Summary
The 2019 Nissan Frontier typically uses 26-inch driver-side and 17-inch passenger-side front wiper blades, with an 11-inch rear blade if a rear wiper is present. Always confirm with the owner’s manual or a parts diagram for your specific trim, and consider using a matched 26"/17" front blade pair for optimal visibility and performance.