The 2019 Toyota Tundra typically uses 26-inch blades on the driver’s side and 20-inch blades on the passenger side for the front windshield, with a 12-inch blade for the rear window. This guide covers those standard sizes and notes any common variations by cab configuration.
Front wiper sizes
The following sizes cover the primary wiper blades that clear the front windshield on most 2019 Tundra models. Blade lengths are measured in inches and refer to the driver’s and passenger’s sides.
- Driver’s side: 26 inches
- Passenger’s side: 20 inches
Front blade sizes for the 2019 Tundra are designed to balance visibility across the driver’s field of view and the passenger side. Using the correct lengths helps ensure full clearance of the windshield in typical weather conditions.
Cab configuration notes
In some scenarios, rare variations by cab size (Access Cab vs. Double Cab or CrewMax) could influence blade compatibility. Always verify by checking the owner’s manual, consulting a parts specialist, or measuring the blades on your vehicle before purchasing replacements.
Rear wiper size
The rear window on the 2019 Tundra uses a single wiper blade. The standard size for most configurations is:
- Rear wiper: 12 inches
Rear wiper sizing is generally consistent across 2019 Tundra cab configurations, but if you have an atypical rear window design or aftermarket parts, confirm the measurement before buying a replacement.
Summary
For the 2019 Toyota Tundra, the typical wiper sizes are 26 inches (driver) and 20 inches (passenger) for the front blades, and 12 inches for the rear blade. Always verify against your exact cab configuration and owner’s manual, or by measuring the blades currently installed, to ensure a precise fit.