For the 2018 Freightliner Cascadia, the standard blade lengths are typically 28 inches on the driver’s side and 20 inches on the passenger side. Wiper sizes can vary based on the windshield configuration and trim, so it’s wise to confirm by checking the vehicle manual or measuring the blades you currently use.
Standard blade sizes for most Cascadia models
The sizes below reflect what you’ll commonly encounter on a 2018 Cascadia. If your windshield or trim differs, your blades may be a different length.
- Driver side: 28 inches
- Passenger side: 20 inches
In practice, these two lengths cover the majority of Cascadia configurations. Always double-check before ordering to ensure an exact fit for your truck.
How to confirm the correct size for your truck
To verify the exact wiper size for your specific vehicle, follow these steps:
- Check the blade currently installed: look for a size stamp along the blade edge or on the packaging.
- Compare with the OE parts listing in Freightliner’s catalog by your truck’s model year or VIN.
- Measure your blades if no size is printed: measure each blade from tip to base on both sides.
- Consult the owner’s manual or contact a Freightliner dealer for your exact trim and windshield configuration.
- Bring the current blades or VIN to an auto parts store to verify compatibility.
Following these steps will help ensure you order the correct sizes for your 2018 Cascadia.
Choosing the right blade type
Beyond length, blade construction matters. Many drivers of heavy-duty trucks opt for beam (flat) blades for better contact and durability on large windshields, especially in challenging weather.
Conventional vs. beam blades
Conventional blades are often less expensive and may work adequately, but beam blades tend to deliver more consistent pressure across the windshield and longer life in dusty or cold conditions common to highway trucking.
Installation and maintenance tips
Install blades according to the manufacturer’s instructions, keep mounting arms clean, replace blades in pairs to maintain uniform clearing, and inspect for streaking or skipping to catch wear early.
Summary
For a 2018 Freightliner Cascadia, the typical wiper blade sizes are 28 inches on the driver’s side and 20 inches on the passenger side. Always verify with the owner’s manual or by measuring the current blades, and consider beam blades for improved performance on a large Cascadia windshield. Regular replacement helps ensure clear visibility and safer driving.
What size are the windshield wipers for the cascadia?
24"
2021 Freightliner Cascadia Windshield Wiper Blades - 24" Driver Side 24" Passenger Side.
What size wipers does a 2018 Freightliner Cascadia take?
Yeahmol 24"+24" Fit For Freightliner Cascadia 2018 Windshield Wiper Blades, Replacement Wiper Blades For Car Front Window (Set of 2, 24 Inch + 24 Inch J U HOOK)
What size wiper blades for 2019 Freightliner Cascadia 125?
24"
Juyioudy 24"+24" Fit For Freightliner Cascadia 2019 Windshield Wiper Blades,6pc.
Can I use 24 instead of 22 wiper blades?
Size matters to a point, just as long as you are about 1 inch higher or lower than your current wiper blade size. If you buy wiper blades that are too big, they might overlap or touch which will cause them to break.