The 2012 Nissan Versa Sedan typically uses 26-inch wipers on the driver’s side and 16-inch blades on the passenger side. This pairing is common for that model year and matches Nissan’s recommended front-wiper lengths.
Sizes can vary by body style and trim, and aftermarket replacements may differ. Always verify the exact blade lengths for your specific vehicle by consulting the owner's manual, the official Nissan service information, or a trusted parts retailer using your VIN or precise model details.
Standard wiper sizes for the Versa Sedan
The following blade lengths reflect the typical factory setup for the 2012 Versa Sedan. Use this as a baseline when shopping for replacements.
- Driver-side blade: 26 inches
- Passenger-side blade: 16 inches
In summary, for most 2012 Versa Sedans, a 26"/16" blade configuration will fit the front wipers. If your vehicle is a hatchback or a different variant, verify the sizes before purchasing.
Variations by body style and how to confirm
Because there were variations in Versa models and trims, it's important to confirm the correct sizes for your exact car before buying replacements. Here are practical steps to verify your needs.
- Check the owner's manual or Nissan’s official service information for your VIN or body style to confirm the exact blade lengths.
- Inspect your current blades for length markings or measure the blade length from end to end to determine the replacement size.
- If you visit an auto parts store, provide the year, make, model, and body style or the existing blade lengths to ensure a proper fit.
- When in doubt, request a two-blade setup of 26 inches (driver) and 16 inches (passenger) and test for proper clearance and coverage.
By confirming with official guides or by measuring, you ensure the correct sizes and optimal visibility for your 2012 Versa.
Summary
For the 2012 Nissan Versa Sedan, the standard front-wiper sizes are typically 26 inches on the driver’s side and 16 inches on the passenger side. Always verify against your vehicle’s specifics—VIN, body style, and trim—to avoid incorrect replacements.