Most modern Toyota Highlanders use a 26-inch driver-side front blade and a 20-inch passenger-side front blade, with a 12-inch rear blade on models that have a rear window wiper. Exact sizes can vary by year and trim, so verify for your specific vehicle.
In this article, we outline the typical sizes for current Highlander models, explain how to confirm the correct blade sizes for your year, and offer tips for replacement and maintenance.
Front wiper blade sizes
These are the sizes you’ll most commonly need for the front wipers on Highlander models in recent years.
- Driver-side front blade: 26 inches
- Passenger-side front blade: 20 inches
The exact lengths can vary on older models or specific trims, so always confirm using the resources below.
Rear wiper blade size
For Highlanders with a rear window wiper, the typical rear blade size is 12 inches, though a few early or specialty trims may use a different size. Checking the blade itself or the owner's manual will confirm the correct length.
- Rear wiper blade: 12 inches
As with the front blades, sizes can vary by year, so verification is important.
How to verify your Highlander’s blade size
To ensure you buy the right blades for your exact year and trim, use these verification steps.
- Check the owner's manual or the sticker on the driver's door jamb for the recommended blade lengths.
- Inspect the existing blades for size markings or measure the blade length with a tape measure.
- Use Toyota's official parts finder tool online by entering your year, model, and trim to confirm compatible blade sizes and part numbers.
Following these steps will reduce the chance of buying blades that don’t fit your Highlander.
Year/trim considerations
Sizes can slightly vary between generations and trims. If in doubt, rely on the official parts finder or consult a dealership parts department with your VIN.
Replacement tips and recommendations
When replacing, purchase the correct sizes (26" driver, 20" passenger, and 12" rear if applicable) and check for any adapter or connector requirements for your vehicle. Replacing blades in pairs for the front is common practice to maintain even wiping performance.
- Use quality blades designed for all-weather performance in your climate.
- Replace wiper blades every 6–12 months, or sooner in harsh conditions or if streaking occurs.
These guidelines help you maintain clear visibility and avoid common issues like streaking or skipping.
Summary
In summary, the typical blade sizes for a current Toyota Highlander are 26 inches on the driver’s side and 20 inches on the passenger’s side for the front, with a 12-inch rear blade on models that feature a rear wiper. Always verify your exact blade sizes for your model year and trim using the owner’s manual, the door jamb sticker, or Toyota’s parts finder to ensure a precise fit.