Most Toyota Venza models use 26-inch driver-side and 17-inch passenger-side front wiper blades, with a typical rear blade around 11 inches. Exact sizes can vary by model year and trim, so verify in your owner's manual or by checking the official parts catalog for your vehicle.
The question covers front and rear blade dimensions across recent Venza generations. This guide outlines the common sizes and offers steps to confirm your specific configuration, since year-to-year changes and optional features can affect blade length.
Front wiper blade sizes
The front blades on a Toyota Venza are normally installed as two different lengths: one long blade on the driver’s side and a shorter blade on the passenger side.
- Driver's side: 26 inches (66 cm)
- Passenger's side: 17 inches (43 cm)
Front blade sizes shown here cover the majority of recent Venza models. Some early or late-year variants may use different lengths, so it’s wise to confirm with your vehicle’s manual or the OEM parts catalog for your exact VIN.
Rear wiper blade size
The rear wiper on the Venza is a single, smaller blade. Size can vary by year and trim, with most recent models using a blade around the 11-inch range, though some configurations may use 12 inches.
- Rear blade: typically about 11 inches (28 cm); some years may use 12 inches (30 cm)
Because rear blade lengths can vary between model years and regional specs, check the owner’s manual or search the OEM catalog by VIN to confirm the exact rear blade size for your Venza.
How to verify your exact size
To ensure you buy the correct blades, use official sources or a precise search by your VIN. Here are reliable ways to verify:
Check the owner's manual
The manual lists the recommended blade sizes for both front and rear wipers and may note any year-specific changes.
Use OEM part numbers or a VIN-specific parts lookup
Enter your VIN on Toyota’s parts site or a reputable parts retailer to pull the exact blade sizes or the correct replacement part numbers for your Venza.
Additional tips for choosing wiper blades
Consider blade type (conventional, beam, or hybrid) and climate when selecting replacements. Beam blades tend to perform better in varied weather conditions, and silicone or coated blades can offer longer life in harsh climates. Always replace blades in matched pairs on the same axle when possible for even wiping performance.
Summary
The Toyota Venza’s typical front wiper setup is 26 inches on the driver's side and 17 inches on the passenger side, with a rear blade around 11 inches depending on the year. However, exact sizes can vary by model year and trim, so verify with the owner's manual or an OEM parts lookup for your specific VIN. When in doubt, consult a Toyota dealer or reputable parts retailer to ensure you get the correct replacements.