The front wiper blades for the 2018 Toyota C-HR are 26 inches on the driver’s side and 16 inches on the passenger’s side, with an 11-inch rear blade. This sizing covers most markets; always double-check your region or trim if you see a different measurement on your current blades.
Front wiper blades: size by position
Standard pairing
For the 2018 C-HR, the typical front-wiper pairing is 26 inches on the driver’s side and 16 inches on the passenger’s side. This configuration is common across many regions, though some markets or trims may vary slightly.
- Driver’s side: 26 inches
- Passenger side: 16 inches
Verifying the correct front sizes is important because using the wrong length can affect coverage and performance, especially in winter or heavy rain.
Rear wiper blade size
Rear blade details
The rear window wiper blade on the 2018 C-HR is typically 11 inches, providing adequate sweep on the rear hatch. Some regional variations may occur, but 11 inches is the standard size for this model year.
- Rear: 11 inches
When replacing the rear blade, confirm the connector type and length to ensure a proper fit on your vehicle’s rear wiper arm.
How to verify the size on your car
To be certain you buy the right blades, you can confirm by checking the current blades, the owner's manual, or the retailer’s fit guide. If you have to measure yourself, use these steps:
- Remove the current blade and measure its length from tip to tip.
- Check the blade’s packaging or the vehicle’s manual for the recommended sizes.
- Match the connector type (pin, hook, or bayonet) to the replacement blade model.
Note: Year, market, and trim level can introduce small variations; when in doubt, bring your vehicle information (year, model, market) to a parts retailer to confirm the correct sizes.
Replacement tips and recommended brands
Choosing the right blade can improve performance and longevity. Consider these options and tips when shopping for blades for your C-HR:
- Bosch ICON or Bosch Exact Derive series for longevity and performance.
- Rain-X Latitude Water Repellency blades for all-weather performance.
- OEM-equivalent or well-reviewed aftermarket blades for cost-conscious replacements.
Tip: Some retailers offer universal adapters, but it's best to select blades designed for your wiper arm connector to avoid fit issues.
Summary
For the 2018 Toyota C-HR, standard front wipers are 26 inches on the driver’s side and 16 inches on the passenger’s side, with an 11-inch rear wiper. Always confirm regional variations and connector types before purchase to ensure a proper fit and optimal visibility.