For most Infiniti QX60 models, the driver-side blade is 26 inches, the passenger-side blade is 17 inches, and the rear blade is 11 inches.
Wiper blade sizes can vary by model year and trim, so you should verify the exact measurements for your vehicle before buying replacements. This guide lays out the typical sizes, how to confirm yours, and tips for replacement.
Typical blade sizes for the QX60
Below are the sizes most commonly used on Infiniti QX60 models from the mid-2010s through the early 2020s. Use this as a starting point if you're unsure, but always confirm in your manual or with a parts retailer for your exact year.
- Driver-side blade: 26 inches
- Passenger-side blade: 17 inches
- Rear window blade: 11 inches
Note: Some model years may vary slightly, particularly for the passenger-side blade or the rear blade. Check your manual or a parts lookup to confirm the precise lengths for your exact year and trim.
How to confirm the exact sizes for your QX60
To ensure the blades fit your specific model year and trim, use official sources or retailer tools. Here are steps to confirm the correct sizes.
- Check the owner's manual under the wiper blade section for the recommended lengths.
- Inspect the driver's door jamb or a visible windshield or hood sticker for any blade-size specification, if present.
- Use an online parts lookup: input your year, make, model (INFINITI QX60) and trim on a reputable retailer or the Infiniti parts site to verify the exact blade lengths.
- Compare with your current blades by measuring their length from tip to end, including any curved sections, to ensure you purchase the same size replacements.
Once you have the correct sizes, you can shop with confidence, selecting a compatible wiper blade type (conventional, beam, or hybrid) and the appropriate connector type for your vehicle.
Rear wiper specifics
The rear wiper on many QX60 models is a compact blade that clears the rear window. The common length is 11 inches, but some model years use a slightly different size. Always verify for your exact year.
To replace the rear blade, detach the old blade head from its wiper arm, slide on a new blade according to the package instructions, and ensure the connector matches your arm type.
Summary
In short, Infiniti QX60 owners typically look for a 26-inch driver-side, a 17-inch passenger-side, and an 11-inch rear wiper blade. Exact sizes can differ by model year and trim, so confirm with the owner's manual or a trusted parts retailer for your specific configuration. Replacing with the correct blade size helps maintain visibility and safety in rain, snow, and mist.