Skip to Content
103 State St East Jordan, MI, 49727
  • MON: Closed
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: 8:00AM - 6:00PM
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook
7984 North St Central Lake, MI, 49622
  • MON: 8:00AM - 6:00PM
  • TUES: 8:00AM - 6:00PM
  • WED: 8:00AM - 6:00PM
  • THUR: 8:00AM - 6:00PM
  • FRI: Closed
  • SAT: Closed
  • SUN: Closed
MORE >
  • Yelp
  • Google Business Profile
  • Facebook

What size wiper blades for a Dodge Journey?

The front blades are typically 26 inches on the driver’s side and 20 inches on the passenger’s side, with a rear blade around 11 inches. Always verify the exact size for your year and trim to ensure a proper fit.


Common front wiper sizes for the Dodge Journey


Why blade lengths vary across years


Front wiper blade lengths for the Journey have often followed a standard pairing, but some model years or trims may use slightly different lengths. The longer driver-side blade clears more of the windshield, while the shorter passenger blade keeps a balanced sweep.



  • Driver-side front blade: 26 inches

  • Passenger-side front blade: 20 inches


The 26"/20" pairing is the most widely used across many Dodge Journeys, but you should confirm for your exact vehicle before ordering.


Rear wiper blade size


Rear blade age and variants


The Journey's rear wiper blade is smaller and mounted on the tailgate. The typical length is around 11 inches, though a few model years may use a different rear blade size. Check your manual or inspect the current blade if you’re unsure.



  • Rear wiper blade: ~11 inches (check exact length for your year)


Rear blades on Journeys are usually a single-strip design; some models may use a two-piece rear blade, which would affect replacement parts.


How to confirm exact size for your Dodge Journey


Because sizes can vary by year and trim, use one of the following methods to confirm the correct blade lengths for your specific vehicle.



  1. Consult your owner's manual or the vehicle's windscreen wiper section.

  2. Inspect the current blades for size markings on the blade or packaging.

  3. Use an online parts finder: input year, make, model to get exact fits.

  4. Ask a parts counter or use a universal blade fitting guide at an auto parts store to verify measurement.


Once confirmed, you can purchase the exact sizes in a single-pack or multi-pack to replace both front blades together.


Summary


In summary, the Dodge Journey typically uses 26-inch driver-side and 20-inch passenger-side front wiper blades, with an approximately 11-inch rear blade. Always verify for your exact year and trim, and consider replacing front blades as a pair for even wiping performance. Keeping a correct-fit set helps maintain clear visibility in all weather conditions.

Ryan's Auto Care

Ryan's Auto Care - East Jordan 103 State St East Jordan, MI 49727 231-222-2199
Ryan's Auto Care - Central Lake 7984 North St Central Lake, MI 49622 231-544-9894

Ask any car or truck owner in Central Michigan who they recommend. Chances are they will tell you Ryan's Auto Care.