Front wiper blades on most Chevy Traverse models are typically 26 inches on the driver’s side and 20 inches on the passenger side, with a smaller rear blade on vehicles that have a rear wiper. However, blade sizes can vary by model year and trim, so it’s important to confirm for your exact vehicle using the manual, current blades, or a parts catalog.
Front wiper blade sizes
The front blade pairing most commonly used on the Traverse is a 26-inch blade on the driver’s side paired with a 20-inch blade on the passenger side. This configuration is standard across several generations, but variations do exist depending on year and trim.
- Driver-side blade: 26 inches
- Passenger-side blade: 20 inches
Bottom line: the typical front-blade pairing is 26"/20". Always verify for your specific year and model to ensure the correct match.
Rear wiper blade (if equipped)
If your Traverse model includes a rear wiper, the blade is shorter and varies by year. A common range is about 10 to 12 inches, but you should confirm the exact length for your vehicle.
- Rear blade length: approximately 10–12 inches (verify for your year)
When replacing the rear blade, it’s especially important to check your specific year and hatch design, since the mounting style can differ between model revisions.
How to confirm your exact blade sizes
Use these steps to ensure you buy the correct wiper blades for your Traverse:
- Consult the owner’s manual or the inside cover often labeled with blade sizes
- Check the packaging on the blade you’re replacing or the blade itself for length measurements
- Visit the Chevrolet parts catalog or ask a dealership or auto parts counter for the exact sizes by year
- Measure the current blades directly if you can safely access them (from tip to tip)
If you prefer a universal option, many retailers offer interchangeable blades with adapters that fit multiple models; just confirm the adapter compatibility and the overall blade length before purchase.
Notes by model year
While the 26"/20" front-blade pairing is common across many Traverse generations, there are exceptions. Always verify for your exact year and trim, especially if you’re replacing only one side or installing a brand with different lengths.
In short, the standard front-blade sizes for a Chevy Traverse are typically 26 inches on the driver’s side and 20 inches on the passenger’s side, with a rear blade that is usually 10–12 inches if your model has a rear wiper. Always check your manual or your current blades to confirm the best match for your vehicle.
Summary: For most Chevy Traverse models, plan on 26" driver-side and 20" passenger-side front blades, plus a rear blade of about 10–12" if equipped. Verify against your year and trim to ensure an exact fit, and consult the owner's manual or a dealer if you’re unsure.