Front wiper blades for the 2020 Corolla are 26 inches on the driver's side and 17 inches on the passenger side. The rear blade, if present (typically on hatchback models), is usually about 11 inches.
The 2020 Corolla lineup includes sedans and hatchbacks, and blade sizes can vary by body style and trim. To ensure accuracy for your exact vehicle, check the owner's manual, inspect the existing blades, or use a trusted auto parts retailer's size finder with your VIN or trim level.
Front Wiper Blade Sizes
Here are the standard front blade measurements you’ll typically find on most 2020 Corolla models. Note that some aftermarket or specialized options may differ.
- Driver’s side: 26 inches
- Passenger’s side: 17 inches
These two sizes cover the vast majority of 2020 Corolla sedans and most hatchbacks built for the North American market. If your car uses a single-blade setup or a different system, verify your specific configuration.
Why blade size matters for visibility
Choosing the correct length ensures full windshield contact, even wipe distribution, and proper park positioning. Using the wrong size can cause streaking, chattering, or inadequate coverage at the edges—especially during rain or snow.
Rear Wiper Blade Size
If your 2020 Corolla includes a rear wiper (common on hatchbacks), the rear blade is typically around 11 inches. Some regional or trim variations may use a different size, so it’s best to confirm before purchasing.
- Hatchback: around 11 inches (some variants may use 12 inches)
- Sedan: commonly no rear wiper; if equipped, verify size from manual or retailer
When replacing the rear blade, ensure you buy the correct length and attach via the correct clip system used by Toyota. If in doubt, remove the old blade and measure the exact length, or take the part number to a parts store.
Rear wiper by body style
In the sedan version of the 2020 Corolla, a rear wiper is typically not installed, while the hatchback version commonly has a rear wiper around 11 inches. Always verify for your exact trim and market.
How to Confirm Your Blade Size
To ensure you get the right fit, you can confirm sizes using several methods:
- Consult the owner's manual or the "Specifications" or windshield wiper section for sizes
- Check the current blades for length markings
- Use the vehicle’s VIN with an official Toyota parts retailer or parts finder tool
- Ask a service advisor or consult the store’s blade-sizing guide with your model year
Correct sizing is important for even wear and clear visibility, especially during heavy rain or snow. If you regularly drive in severe conditions, consider a beam blade or hybrid blade for better performance.
Where to Buy and How to Install
Wiper blades for a 2020 Corolla can be purchased at auto parts stores, Toyota dealers, or online retailers. Replacement is typically quick and requires a few steps, such as releasing the old blade from its arm, aligning the new blade, and clipping or locking it in place. Refer to the blade packaging for precise installation instructions.
- Carry the blade to a store or shop with your car present to verify compatibility
- Consider brands that fit North American versions if you travel or buy abroad
After installation, test both front blades to ensure even contact with the windshield and verify that the wiper park position is correct.
Summary
The 2020 Toyota Corolla typically uses 26-inch driver-side and 17-inch passenger-side front wiper blades. A rear wiper is only present on hatchback models and is usually about 11 inches. Always confirm with the owner’s manual or a trusted parts retailer to match your exact trim and region.