The front driver-side wiper is 26 inches, the front passenger-side wiper is 16 inches, and the rear wiper is 12 inches.
In detail, wiper blade sizes for the 2020 Trax typically follow a two-blade front setup and a single rear blade. Sizes can vary by market, production run, or model year adjustments, so it’s wise to verify against your owner’s manual or by measuring the blades you replace. This guide reflects the standard sizes used on most 2020 Trax models and offers tips to confirm fit before purchase.
Front wiper blades
The front wipers sweep the windshield with two different lengths to cover the driver’s and passenger’s sides. The standard pairing for the 2020 Trax is as follows:
- Driver's side: 26 inches
- Passenger's side: 16 inches
Using the correct front blade lengths ensures full coverage and proper rubbing against the windshield for optimal clearance in rain or snow.
Rear wiper blade
The Trax's rear hatch wiper is a single, shorter blade designed for the rear window. The standard size is:
- Rear: 12 inches
Make sure the rear blade matches the mounting arm and connector on your specific hatch, as some regional variants may differ slightly.
How to verify wiper blade sizes
When in doubt, verify sizes before purchasing replacements. Use one of these methods:
- Consult the owner's manual or the manufacturer’s parts catalog for 2020 Trax specifications.
- Measure the existing blades from tip to tip and compare against standard sizes (26", 16", 12").
- Bring the vehicle to an auto parts store and have a staff member confirm fit by model/year.
Verifying sizes helps ensure you select blades that fit properly and perform well in inclement weather.
Tips on blade types and maintenance
Front blades come in traditional framed, beam, and hybrid designs. For most drivers, a high-quality beam or hybrid blade offers better uptime and performance in winter months. Replace both front blades at roughly the same time to maintain even wiping pressure, and inspect the rear blade for wear every 6–12 months.
Summary
For the 2020 Chevy Trax, plan on 26 inches for the driver’s front blade, 16 inches for the passenger front blade, and 12 inches for the rear blade. Always double-check with the owner’s manual or measure your existing blades to confirm fit, as regional variations can occur. Properly sized blades improve visibility and safety in inclement weather.