The 2013 Scion FR-S uses 26-inch blades on the driver’s side and 16-inch blades on the passenger side.
The FR-S is a compact sports coupe developed by Toyota and Subaru, closely related to the Toyota 86 and Subaru BRZ. Front wiper blades are sized to the swept area of the windshield, and for this model year the two-blade setup typically uses different lengths on each side. Note that the FR-S does not typically come with a rear wiper.
Front Wiper Blade Sizes
Below are the standard front-blade lengths commonly listed for the 2013 FR-S. These reflect the two sizes most retailers and OEM suppliers cite for the vehicle.
- Driver's side blade: 26 inches
- Passenger's side blade: 16 inches
Using the correct sizes ensures full coverage and proper wiping performance without overhang that could snag on the hood or fender.
Notes on fit and replacement
When shopping for replacements, verify the sizes by checking the label on your current blades, consulting the owner's manual, or using the vehicle lookup feature on parts retailers’ sites. Some aftermarket options are sold as a single 26-inch and a 16-inch pair or as two separate blades for a two-blade setup. If in doubt, bring your current blades or your VIN to the parts counter to confirm compatibility.
Summary
For a 2013 Scion FR-S, plan for a 26-inch driver-side wiper blade and a 16-inch passenger-side blade. There is typically no rear wiper on this model. Always confirm exact lengths for your specific vehicle before purchase, as regional variations can occur.
What size windshield wiper for a 2013 Toyota?
Note: 26" Driver side wiper. In Stock How soon can I get this? Note: 16" Passenger side wiper.
What size wipers for Scion FRS?
Front Windshield Wiper Blades For SCION FR-S 11-16 XB 08-15 Pair 22"20"AllSeason | eBay.
What size windshield wipers for 2013 frs?
2013 Scion FR-S Wiper Blades Size/Price Chart
| Car | Driver | Pass. |
|---|---|---|
| 2013 Scion FR-S | 22 in. | 20 in. |
Can I use 24 instead of 22 wiper blades?
Size matters to a point, just as long as you are about 1 inch higher or lower than your current wiper blade size. If you buy wiper blades that are too big, they might overlap or touch which will cause them to break.