The front wiper blades are typically 24 inches on the driver’s side and 18 inches on the passenger side; the rear wiper blade, if your model has one, is about 12 inches. Always verify with your owner's manual or by measuring the blades you remove to be certain.
This article explains the standard sizes for the 2011 Xterra, notes variations by trim or production run, and provides steps to confirm the exact sizes for your specific vehicle, along with tips for replacement and maintenance.
Front wiper blade sizes
Before listing the sizes, note that the Xterra’s front wipers are generally sized to fit the driver’s and passenger’s sides separately. Sizes can vary slightly by trim or production batch, so it’s best to confirm if you see a discrepancy.
- Driver-side: 24 inches
- Passenger-side: 18 inches
These front blade lengths fit most 2011 Xterra models. If your current blades differ, check the packaging or the owner’s manual to confirm the correct size for your vehicle.
Rear wiper blade size
Not all 2011 Xterras have a rear wiper; for those that do, the blade is typically smaller than the front blades, around 12 inches.
- Rear: 12 inches (if equipped)
Rear blade sizes can vary by trim. Verify by measuring or consulting the owner’s manual if your model’s rear wiper uses a different size.
How to verify the exact size for your vehicle
Check the owner’s manual or the blade packaging when purchasing replacements. You can also remove a blade and measure its length from tip to tip. For a quick check, compare to the length stamped on the blade or its adapter.
Tips for replacement and maintenance
Replace the front blades in pairs to ensure even wiping and avoid streaking. If you drive in heavy rain or harsh conditions, consider premium beam blades for better performance. Replace the rear blade separately if your Xterra has a rear wiper.
Summary
For a 2011 Nissan Xterra, the typical front wiper blade sizes are 24 inches on the driver’s side and 18 inches on the passenger side, with a rear blade around 12 inches if the model has one. Always verify against your manual or by measuring your current blades, as sizes can vary by trim or production run.